Daewoo Washing Machine Error E8

⚡ Quick Answer: The Daewoo washing machine E8 error indicates a malfunction in the motor Hall input IC or its connections during initial operation. This can cause the... ⚠️ Difficulty Varies

What Does Error E8 Mean?

The Daewoo washing machine E8 error indicates a malfunction in the motor Hall input IC or its connections during initial operation. This can cause the motor to stop, preventing the machine from starting. Additionally, an issue with the door lock mechanism can also contribute to this error, leading to improper sealing of the door. If you encounter this error, it’s essential to check both the motor connections and the door lock functionality.

Common Symptoms:

  • Engine stops and E8 is displayed on the panel. %20Washing%20Machine%20Error%20Codes.pdf?utm_source=chatgpt.com))

Possible Causes

  • Abnormal Hall input IC signal or connection issue related to motor rotation at startup (medium)
  • Faulty connection or wiring between motor and control board (medium)
  • Fault in control board components affecting motor control (low)

How to Fix Error E8

DIY Fix Perform basic checks and restart

  1. Power off and unplug the washing machine.
  2. Wait at least 1–2 minutes and then plug it back in.
  3. Attempt a restart to see if the error persists.

Technician Only Inspect motor Hall sensor and connections

  1. Disconnect power and access the motor assembly.
  2. Check wiring harnesses and connectors between the motor Hall sensor and control board for damage or looseness.
  3. Test the Hall sensor output signals per service specifications and replace if faulty.

Parts needed: Motor Hall sensor (tachogenerator), Wiring harness/connectors

Technician Only Control board diagnostic and repair

  1. With power off, remove and visually inspect the control board for burned components or damaged tracks.
  2. Perform electrical testing of key motor driver components (triac, capacitors) if skilled.
  3. Replace the control board if diagnostics confirm internal failures.

Parts needed: Control board, Associated electronic components

🛑 When to Call a Pro:
  • If the E8 error persists after basic restart attempts.
  • If you are not comfortable accessing internal motor components or control board.
  • If visual inspection shows significant damage to wiring or electronic components.

Next step

Choose the next step for E8

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 0-5 ohms
part_number Daewoo 6501KW2001A
voltage_rating 120V AC

Common Questions

What does E8 error mean on daewoo washing machine?

E8 error indicates a malfunction in the motor Hall input IC or door lock mechanism, causing the motor to stop.

Can I fix daewoo washing machine E8 error myself?

Yes, you can try basic checks like unplugging the machine for a few minutes and restarting it.

How much does it cost to fix E8 error?

Repair costs vary by model and region; check with local technicians for estimates.

When should I call a technician for E8?

Call a technician if E8 persists after basic troubleshooting or if you're uncomfortable accessing internal components.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!