Daewoo Washing Machine Error IE
⚡ Quick Answer: The Daewoo washing machine IE error indicates a water inlet issue, usually caused by insufficient water supply, a malfunctioning water level sensor, o... ✅ DIY Fixable
What Does Error IE Mean?
The Daewoo washing machine IE error indicates a water inlet issue, usually caused by insufficient water supply, a malfunctioning water level sensor, or clogged inlet components. This error typically results in the machine failing to fill with water, causing the washing cycle to stall. To troubleshoot, check the water supply, inspect hoses, and clean filters.
Common Symptoms:
- No water entering the machine
- Washing cycle stalls during initial fill
- Error IE shows on display after attempted fill
Possible Causes
- Insufficient or blocked water supply (medium)
- Water level sensor not detecting change (medium)
- Clogged or restricted inlet components (filter/valve) (medium)
How to Fix Error IE
DIY Fix Check basic water supply and connections
- Ensure the water tap supplying the washer is fully open
- Inspect the inlet hose for kinks or blockages
- Clean the inlet hose filter if present
DIY Fix Verify water level changes and reset
- Turn off and unplug the washer for a minute, then plug back in to reset sensors
- Start a new wash cycle and watch for water fill
- If water doesn’t rise within a few minutes, stop and inspect supply
Technician Only Test/replace water level sensor and inlet valve
- Disconnect power and access internal water level sensor and inlet valve
- Test sensor output and inlet valve function with appropriate tools
- Replace sensor or inlet valve if defective
Parts needed: water level sensor, inlet valve
- Water supply is adequate but IE persists after basic checks
- Visible water leaks or unusual noises during filling
- Error recurs after replacing accessible parts and the machine still won’t fill properly
Next step
Choose the next step for IE
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Water Inlet Valve |
| resistance | 500-1500 ohms |
| part_number | DWD-WIV001 |
| voltage_rating | 120V AC |
Common Questions
What does IE error mean on daewoo washing machine?
The IE error means the washer is not detecting water fill due to issues with the inlet valve or water supply.
Can I fix daewoo washing machine IE error myself?
Yes, you can check the water supply, inspect hoses for blockages, and clean the inlet filter.
How much does it cost to fix IE error?
The estimated cost to fix the IE error ranges from $50 to $150 for parts, depending on your model.
When should I call a technician for IE?
Call a technician if the IE error persists despite adequate water supply or if you notice leaks or unusual noises.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!