Daewoo Washing Machine Error OE

⚡ Quick Answer: The Daewoo Washing Machine OE error indicates a drainage issue, where water fails to drain from the drum. This could be due to a blocked or kinked dra... ✅ DIY Fixable

What Does Error OE Mean?

The Daewoo Washing Machine OE error indicates a drainage issue, where water fails to drain from the drum. This could be due to a blocked or kinked drain hose, a clogged drain pump filter, or a malfunctioning drain pump. If you see the 'OE' code and notice water remaining in the drum, it's essential to address the drainage system promptly to avoid further issues.

Common Symptoms:

  • Water remains in the drum after a wash or spin cycle.
  • Error code OE appears on the display during or after drainage.
  • Machine stops mid‑cycle when trying to evacuate water.

Possible Causes

  • Blocked or kinked drain hose (medium)
  • Clogged or obstructed drain pump filter / drain pump (medium)
  • Faulty drain pump or pump electrical issues (medium)
  • Malfunctioning water level sensor linked to drainage detection (low)

How to Fix Error OE

DIY Fix Check and clear drainage hose and pump filter

  1. Turn off and unplug the washing machine.
  2. Locate the drain hose at the back of the machine and inspect it for kinks, bends, or visible obstructions.
  3. Remove and straighten the drain hose if needed.
  4. Open the small access panel at the bottom front of the washer.
  5. Use a shallow pan to catch water, then unscrew and remove the drain pump filter.
  6. Clean any lint, debris, or foreign objects from the filter and housing.
  7. Replace the filter, ensure it is tightened properly, and close the access panel.

Technician Only Inspect and service the drain pump and related components

  1. Verify proper voltage and signal to the drain pump motor.
  2. Test drain pump operation with diagnostic tools.
  3. Check and repair or replace any damaged wiring or connectors to the pump.
  4. Replace the drain pump if it fails to operate or shows mechanical wear.
  5. Inspect the water level sensor and its connections if drain issues persist after pump servicing.

Parts needed: Drain pump assembly, Drain hose and clamps, Water level sensor (if applicable), Wiring harness/connectors

🛑 When to Call a Pro:
  • Water leakage from the machine during attempts to drain.
  • No response from the pump after cleaning the filter and hose.
  • Burnt smell or unusual noises from the pump area.

Next step

Choose the next step for OE

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Drain Hose

Carries waste water from the drain pump to your home's standpipe or sink drain.

$15 - $30 · Easy · 15-30 mins

Check fit & price
Possible related component

Pressure Switch

Detects the water level inside the tub and signals when to start or stop filling.

$25 - $65 · Easy · 15-30 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 50W
component Drain Pump
resistance 30-50 ohms
part_number DWD-PUMP-001
voltage_rating 120V AC

Common Questions

What does OE error mean on Daewoo Washing Machine?

OE error indicates a drainage failure, causing water to remain in the drum.

Can I fix Daewoo Washing Machine OE error myself?

Yes, you can check and clear the drainage hose and pump filter before calling a technician.

How much does it cost to fix OE error?

Estimated repair costs range from ¥5,000 to ¥20,000+, depending on parts and region.

When should I call a technician for OE?

Call a technician if there is water leakage, no pump response after cleaning, or unusual smells.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!