Daewoo Washing Machine Error E2
⚡ Quick Answer: The Daewoo washing machine E2 error indicates a drainage issue, often stemming from problems with water intake or overflow. The machine may stop opera... ✅ DIY Fixable
What Does Error E2 Mean?
The Daewoo washing machine E2 error indicates a drainage issue, often stemming from problems with water intake or overflow. The machine may stop operating during cycles if it cannot fill or drain water correctly. Users typically observe the error when the water behavior is abnormal, such as not filling adequately or overfilling unexpectedly.
Common Symptoms:
- Error appears at the start of a cycle or during rinse/filling phase with issues related to water behavior (either not filling or overfilling) observed by users.
- Machine may stop operation and display E2 when water control does not behave as expected.
Possible Causes
- Incorrect water intake / water supply issue (medium)
- Overflow/continuous water supply detected (medium)
How to Fix Error E2
DIY Fix Check water supply and inlets
- Ensure the water tap supplying the washing machine is fully open.
- Check that the inlet hose is connected properly and not kinked.
- Inspect and clean the inlet filter if accessible.
DIY Fix Inspect for overflow behavior
- Look for signs of overfilling or water remaining in the drum unexpectedly.
- Ensure the water level inside the drum does not exceed normal marks.
Technician Only Service water inlet valves and water level sensor
- Diagnose the inlet valve for proper operation and replace if faulty.
- Check the water level pressure sensor (or water level detection mechanism).
- Verify wiring harnesses between valves, sensors, and control board.
Parts needed: Water inlet valve, Water level sensor/pressure switch, Hoses and connectors
- Persistent E2 error after checking water supply and inlet filters.
- Signs of overfilling, leaking water, or water level sensor malfunction.
- Unusual noises or water behavior that cannot be resolved with basic user checks.
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Daewoo 4681EA2001T |
| voltage_rating | 120V AC |
Common Questions
What does E2 error mean on Daewoo washing machine?
E2 indicates a drainage issue, usually related to abnormal water intake or overflow.
Can I fix Daewoo washing machine E2 error myself?
Yes, check the water supply, ensure hoses are connected properly, and clean inlet filters.
How much does it cost to fix E2 error?
Repair costs range from ¥3,000 to ¥15,000+, depending on parts and region.
When should I call a technician for E2?
Call if the E2 error persists after user checks or if you notice leaks or unusual noises.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!