Chef Dishwasher Error E14

⚡ Quick Answer: The Chef dishwasher error E14 indicates a problem with the water inlet valve, which may prevent the dishwasher from filling with water or cause unusua... ✅ DIY Fixable

What Does Error E14 Mean?

The Chef dishwasher error E14 indicates a problem with the water inlet valve, which may prevent the dishwasher from filling with water or cause unusual humming sounds. To troubleshoot, check that the water supply is turned on, inspect the inlet hose for kinks or blockages, and ensure that household water pressure is adequate. If issues persist, further inspection of the water inlet and flow sensors may be needed.

Possible Causes

  • Water Inlet Valve
  • Faulty Wiring
  • Control Board Issue

How to Fix Error E14

DIY Fix Check basic water supply

  1. Make sure the water tap supplying the dishwasher is fully open.
  2. Check that the inlet hose isn’t kinked or blocked.
  3. Ensure adequate household water pressure.

DIY Fix Power cycle the dishwasher

  1. Turn off and unplug the dishwasher, or switch off its circuit breaker.
  2. Wait 1–2 minutes.
  3. Restore power and attempt a fresh wash cycle.

Technician Only Inspect water inlet and sensors

  1. With power off, access the water inlet valve and check for debris or damage.
  2. Inspect any flow or level sensors for faults or disconnections.
  3. Test components with appropriate tools (multimeter) if applicable.

Parts needed: water inlet valve, flow/level sensors

🛑 When to Call a Pro:
  • If the error persists after basic water supply checks and power cycling.
  • If there are signs of leakage, flooding, electrical issues, or unusual noises.
  • If the dishwasher is under warranty—contact official service to avoid voiding coverage.

Next step

Choose the next step for E14

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Water Inlet Valve

Controls the flow of hot and cold water into the appliance.

Typical part-only price
$25 - $60
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E14 error mean on chef dishwasher?

E14 error indicates a malfunction in the water inlet valve, causing the dishwasher to not fill with water.

Can I fix chef dishwasher E14 error myself?

Yes, check the water supply, inspect the inlet hose, and power cycle the dishwasher.

How much does it cost to fix E14 error?

Estimated repair costs range from ¥3,000 to ¥15,000, varying by region and parts.

When should I call a technician for E14?

Call a technician if the error persists after basic checks, or if you notice leaks or unusual noises.

Sources & References

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!