Chef Dishwasher Error E03
⚡ Quick Answer: The E03 error code on Chef dishwashers indicates a malfunction with the drain pump, which may result in the dishwasher stopping mid-cycle and failing ... ✅ DIY Fixable
What Does Error E03 Mean?
The E03 error code on Chef dishwashers indicates a malfunction with the drain pump, which may result in the dishwasher stopping mid-cycle and failing to reach the correct wash temperature. If you hear unusual noises during operation, this could further confirm the issue. It's essential to address this error promptly to ensure your dishwasher operates efficiently.
Common Symptoms:
- Dishwasher stopping mid‑cycle with E03 displayed (generic pattern for E03 in some brands)
- Possible failure to reach correct wash temperature (generic pattern)
Possible Causes
- Drain Pump
- Blocked Drain Hose
- Faulty Control Board
How to Fix Error E03
DIY Fix Basic checks when E03 appears (generic guidance)
- Turn off power and restart the dishwasher to see if the code clears.
- Ensure water supply is on and water pressure is adequate.
- Check and clean inlet filters at the water connection and inside the dishwasher.
- Refer to your specific Chef model’s user manual for error definitions.
Technician Only Professional diagnostics for E03 (generic dishwasher guidance)
- Verify water inlet valve and flow to machine.
- Test temperature sensor / NTC and heating element if present.
- Inspect control board for errors related to heating circuit / sensors.
Parts needed: Temperature sensor (if fitted), Heating element / relay (if fitted), Water inlet valve
- If the error persists after basic checks and restart.
- If the dishwasher fails to fill with water or shows unusual behavior.
Next step
Choose the next step for E03
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E03 error mean on chef dishwasher?
E03 indicates a drain pump malfunction, causing the dishwasher to stop mid-cycle.
Can I fix chef dishwasher E03 error myself?
Yes, you can try restarting the dishwasher and checking the water supply and inlet filters.
How much does it cost to fix E03 error?
Repair costs range from ¥5,000 to ¥25,000, depending on the region and parts needed.
When should I call a technician for E03?
Call a technician if the error persists after basic checks or if the dishwasher fails to fill with water.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!