Chef Dishwasher Error E01
⚡ Quick Answer: The Chef dishwasher E01 error indicates a possible malfunction in the drain pump, which may cause the dishwasher to stop mid-cycle or fail to drain wa... ✅ DIY Fixable
What Does Error E01 Mean?
The Chef dishwasher E01 error indicates a possible malfunction in the drain pump, which may cause the dishwasher to stop mid-cycle or fail to drain water properly. This error can also appear during the fill or drain stages and may be accompanied by unusual noises. Users should first check the water supply and drainage system for kinks or blockages and attempt to reset the dishwasher to resolve the issue.
Common Symptoms:
- Dishwasher stops mid‑cycle
- Error displayed at startup or during fill/drain stages
- Possible failure to fill with water or to drain properly
Possible Causes
- Drain Pump
- Clogged Drain Filter
- Faulty Wiring
How to Fix Error E01
DIY Fix Basic water supply and reset troubleshooting
- Ensure the dishwasher’s water supply valve is fully open.
- Check the inlet hose for kinks or obvious blockages.
- Turn off and unplug the dishwasher for several minutes, then restore power to attempt a reset.
- Verify that drainage paths (filters, drain hose connections) are clear and not obstructed.
- If the error persists after basic water supply and drainage checks
- If signs of internal water leakage occur (standing water, moisture under base)
- If you are unsure how to safely inspect or access internal parts
Next step
Choose the next step for E01
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E01 error mean on chef dishwasher?
The E01 error indicates a possible malfunction in the drain pump, causing the dishwasher to stop mid-cycle or fail to drain water.
Can I fix chef dishwasher E01 error myself?
Yes, you can check the water supply valve, inspect the inlet hose for blockages, and reset the dishwasher to troubleshoot the E01 error.
How much does it cost to fix E01 error?
The estimated repair cost for the E01 error varies by model and region, so it is best to consult a local technician for an accurate quote.
When should I call a technician for E01?
Call a technician if the E01 error persists after troubleshooting, if you notice internal water leakage, or if you're unsure how to safely inspect the appliance.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!