Chef Dishwasher Error E13
⚡ Quick Answer: The Chef dishwasher error E13 indicates a malfunction, likely related to the drain pump. Users may notice unusual noises during operation. While speci... ⚠️ Difficulty Varies
What Does Error E13 Mean?
The Chef dishwasher error E13 indicates a malfunction, likely related to the drain pump. Users may notice unusual noises during operation. While specific causes remain unverified, it's advisable to perform basic checks, including ensuring the water supply hose is properly connected and inspecting for leaks.
Possible Causes
- Drain Pump
- Clogged Drain Hose
- Faulty Control Board
How to Fix Error E13
DIY Fix Basic checks due to lack of official info
- Power off the dishwasher and unplug it for a few minutes, then restore power to see if the code clears.
- Check that the water supply hose is connected correctly and not kinked.
- Inspect for visible leaks or water accumulation under/around the dishwasher.
- Confirm you are using correct dishwasher detergent and not excessive amounts.
Technician Only Model‑specific diagnostic required
- Obtain the exact model number and search for the official Chef dishwasher manual or service documentation.
- Use a professional diagnostic tool or service menu (if available) to read precise fault details.
- Inspect internal sensors (water temperature, level, pressure) and wiring connections.
- If an internal sensor or control board fault is suspected, test components with appropriate tools (e.g., multimeter) and replace as necessary.
Parts needed: temperature sensor, water level/pressure sensor, control board, wiring harness
- If the error persists after basic checks and power reset.
- If there are signs of water leaks, burning smells, or unusual noises.
- If you cannot locate model‑specific documentation or error definitions.
Next step
Choose the next step for E13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 20-30 ohms |
| part_number | Chef DW-PUMP-001 |
| voltage_rating | 240V AC |
Common Questions
What does E13 error mean on chef dishwasher?
E13 error indicates a potential drain pump malfunction, often accompanied by unusual noises.
Can I fix chef dishwasher E13 error myself?
Yes, you can try resetting the dishwasher and checking the water supply hose for kinks or leaks.
How much does it cost to fix E13 error?
Repair costs typically range from $50 to $300+, depending on the parts needed.
When should I call a technician for E13?
Call a technician if the error persists after checks, or if you notice leaks, burning smells, or strange noises.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!