Candy Washing Machine Error E22
⚡ Quick Answer: The Candy washing machine E22 error indicates a malfunction in the drain pump system, often causing the cycle to stop, water not draining properly, an... ✅ DIY Fixable
What Does Error E22 Mean?
The Candy washing machine E22 error indicates a malfunction in the drain pump system, often causing the cycle to stop, water not draining properly, and unusual noises. This may be due to blockages in the drainage pathways, a malfunctioning pressure switch, or issues in the heating circuit.
Common Symptoms:
- Cycle stops before completion
- Water not draining properly
- Repeated filling and draining
- Machine beeps before showing E22
- Lights may flash indicating E22
Possible Causes
- Drainage obstruction (filter, hose, or pump blockage) (medium)
- Pressure switch (water level sensor) malfunction (medium)
- Heating circuit or related component issue (low)
How to Fix Error E22
DIY Fix Check and clean drainage pathways
- Turn off and unplug the machine.
- Locate and clean the drain pump filter of debris.
- Inspect drain hose for kinks, blockages, or damage and straighten/clean as needed.
DIY Fix Inspect pressure switch hose and reset machine
- Disconnect power for several minutes to reset electronics.
- Check the pressure switch hose for blockages or disconnection (access may be behind top/front panel).
- Reconnect and test with a short rinse cycle to see if error persists.
Technician Only Test and replace faulty components
- Use multimeter to test pressure switch, drain pump, and heating element for proper continuity.
- Replace any defective parts (pressure switch, drain pump, water level sensor, heating element) as needed.
- Check wiring and connectors for damage or corrosion and repair.
Parts needed: pressure switch, drain pump, drain hose, heating element, wiring/connectors
- If the error persists after cleaning drainage and inspecting pressure switch/hose
- If internal components (pump, pressure switch, heating element) test faulty
- If wiring or control board faults are suspected
Next step
Choose the next step for E22
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | CANDY 41014625 |
| voltage_rating | 230V AC |
Common Questions
What does E22 error mean on Candy washing machine?
E22 indicates a drain pump malfunction, causing water not to drain and cycle interruptions.
Can I fix Candy washing machine E22 error myself?
Yes, you can clean the drain pathways and inspect the pressure switch to attempt a fix.
How much does it cost to fix E22 error?
Repair costs range from $50 to $200+, depending on the faulty components.
When should I call a technician for E22?
Call a technician if the error persists after your DIY efforts or if internal components are faulty.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!