Candy Washing Machine Error E03
⚡ Quick Answer: The Candy Washing Machine E03 error indicates a drainage system fault, preventing water from being evacuated within the expected time. This often resu... ✅ DIY Fixable
What Does Error E03 Mean?
The Candy Washing Machine E03 error indicates a drainage system fault, preventing water from being evacuated within the expected time. This often results in the machine stopping mid-cycle with water left in the drum, unusual noises during operation, and an error display during the drain or rinse phases. Common causes include a clogged drain pump filter, blocked drain hose, or a malfunctioning drain pump.
Common Symptoms:
- Washing machine stops mid‑cycle with water remaining in the drum
- Pump attempts to drain but water level does not decrease
- Error displayed when entering drain or rinse/finish phase
Possible Causes
- Clogged drain pump filter (medium)
- Blocked or kinked drain hose (medium)
- Obstruction or failure of drain pump impeller/pump (medium)
- Water level sensor reading issue interfering with drain detection (low)
How to Fix Error E03
DIY Fix Basic drainage troubleshooting
- Turn off and unplug the washing machine.
- Locate and clean the drain pump filter (usually behind a bottom front panel).
- Check the drain hose for kinks, bends, or obstructions; straighten and clear as needed.
- Ensure external drain connection is not clogged or blocked.
- Restart the machine and run a short cycle to test drainage.
Technician Only Advanced diagnostic and repair
- Perform a detailed inspection of the drain pump and impeller for blockages or wear.
- Test drain pump electrical function with appropriate tools (e.g., multimeter).
- Check pressure switch/water level sensor functionality and tubing for blockages.
- Inspect internal wiring and connections related to the drain circuit.
- Replace defective components such as pump assembly or sensors as required.
Parts needed: Drain pump assembly, Pump filter, Drain hose, Water level sensor/pressure switch
- If basic user troubleshooting does not clear the error
- If water remains in the drum after multiple attempts to clear the blockage
- If there are signs of component damage (leaks, strange noises)
Next step
Choose the next step for E03
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 20-40 ohms |
| part_number | Candy 41014443 |
| voltage_rating | 230V AC |
Common Questions
What does E03 error mean on Candy Washing Machine?
E03 indicates a drainage issue, preventing water from being evacuated during operation.
Can I fix Candy Washing Machine E03 error myself?
Yes, you can clean the drain pump filter and check the drain hose for kinks or obstructions.
How much does it cost to fix E03 error?
Repair costs range from $50 to $200+, depending on parts and labor.
When should I call a technician for E03?
Call a technician if troubleshooting fails, water remains in the drum, or if you notice component damage.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!