Candy Washing Machine Error E10
⚡ Quick Answer: The Candy Washing Machine E10 error indicates a water inlet issue, preventing the machine from filling with water. This problem may arise due to insuf... ✅ DIY Fixable
What Does Error E10 Mean?
The Candy Washing Machine E10 error indicates a water inlet issue, preventing the machine from filling with water. This problem may arise due to insufficient water supply, a faulty pressure switch or water level sensor, or blockages in the inlet hose or filter. Users may notice the error at the start of a cycle or during water intake, often accompanied by a flashing display.
Common Symptoms:
- Machine fails to fill with water within expected time
- Error appears at start of cycle or during water intake stage
Possible Causes
- Insufficient water intake due to water supply problems (medium)
- Faulty water pressure/water level sensor or pressure switch (medium)
- Obstruction, kink, or blockage in inlet hose or filter (medium)
How to Fix Error E10
DIY Fix Check and correct the water supply and connections
- Ensure the water supply tap to the washing machine is fully open
- Inspect and straighten the inlet hose to remove kinks
- Turn off water, disconnect inlet hose and check/clean inlet filters
DIY Fix Verify pressure switch / water level sensing hose
- Unplug the machine and remove access panel
- Locate the pressure hose from the drum to the pressure switch
- Ensure the hose is seated firmly, not cracked or blocked
Technician Only Test and replace faulty sensors or components
- Test continuity and operation of the pressure switch with a multimeter
- Inspect wiring between pressure switch and control board
- Replace pressure switch or water level sensor module if defective
Parts needed: Pressure switch / water level sensor, Wiring harness, Inlet valve assembly (if needed)
- If E10 persists after checking water supply and basic hose/sensor inspection
- If there are signs of internal electrical or pressure switch failure
- If there is uncertainty about safe internal component access
Next step
Choose the next step for E10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Water Inlet Valve |
| resistance | 2-5 ohms |
| part_number | CANDY 41013600 |
| voltage_rating | 220V AC |
Common Questions
What does E10 error mean on Candy Washing Machine?
E10 indicates a water inlet issue, causing the machine to fail to fill with water.
Can I fix Candy Washing Machine E10 error myself?
Yes, check the water supply, hose connections, and inspect the pressure switch.
How much does it cost to fix E10 error?
Repair costs range from €30 to €100+, depending on parts and labor.
When should I call a technician for E10?
Call a technician if E10 persists after basic checks or if there's internal failure.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!