Candy Washing Machine Error E05
⚡ Quick Answer: The Candy Washing Machine E05 error code indicates a malfunction related to the water heating system, specifically a faulty temperature sensor (NTC pr... ✅ DIY Fixable
What Does Error E05 Mean?
The Candy Washing Machine E05 error code indicates a malfunction related to the water heating system, specifically a faulty temperature sensor (NTC probe) or issues within the heating circuit. This error often results in the washing cycle stopping mid-cycle when heating is required, and the display will show E05 or a corresponding blinking signal. Additionally, water may not reach the expected temperature during the wash, leading to ineffective cleaning.
Common Symptoms:
- Washing cycle stops mid‑cycle when heating should occur
- Display shows E05 or blinking signal pattern corresponding to E05
- Water does not reach expected temperature during wash
Possible Causes
- Faulty or open circuit temperature sensor (NTC) (medium)
How to Fix Error E05
DIY Fix Basic checks & reset
- Turn off and unplug the washing machine from power.
- Wait 5–15 minutes, then plug it back in and power on to reset error.
- Start a short wash to see if the E05 error reappears.
Technician Only Diagnose and repair heating/sensor circuit
- Disconnect power to the machine.
- Access the heating element and temperature sensor assembly (usually at the back/bottom).
- Use a multimeter to measure the NTC sensor resistance at room temperature; compare with expected values.
- Check heating element continuity and inspect for damage or scaling.
- Inspect wiring and connectors between sensor, heating element, and control board for damage or loose connections.
- Replace defective parts (NTC sensor, heating element) as identified.
- Reassemble and test the machine to confirm resolution.
Parts needed: NTC temperature sensor, Heating element (TEN), Wiring harness/connectors
- Error persists after basic reset and inspection
- User is not experienced with electrical appliance repair
- Signs of water leakage, burning smell, or rapid cycling stops
Next step
Choose the next step for E05
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 50-100 ohms |
| part_number | CANDY 41014640 |
| voltage_rating | 230V AC |
Common Questions
What does E05 error mean on Candy Washing Machine?
E05 indicates a fault in the heating system, often due to a faulty temperature sensor.
Can I fix Candy Washing Machine E05 error myself?
Yes, try resetting the machine by unplugging it for 5-15 minutes and then testing again.
How much does it cost to fix E05 error?
Estimated repair costs range from $50 to $200+, depending on parts and labor.
When should I call a technician for E05?
Call a technician if the error persists after a reset or if you're inexperienced with repairs.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!