Candy Washing Machine Error E18
⚡ Quick Answer: The Candy washing machine error E18 indicates a drainage issue caused by a malfunction in the control board or communication faults. This error typica... ✅ DIY Fixable
What Does Error E18 Mean?
The Candy washing machine error E18 indicates a drainage issue caused by a malfunction in the control board or communication faults. This error typically leads to the machine stopping mid-cycle or failing to complete programs, along with unresponsive controls. Inspecting the main PCB and wiring connections is essential to resolve this issue.
Common Symptoms:
- Error E18 displayed on the control panel
- Machine stops mid‑cycle or does not start/complete programs
- Illogical or unresponsive controls
Possible Causes
- Control board (main PCB) malfunction or communication fault (medium)
- Loose/damaged wiring or connectors relating to control electronics (medium)
How to Fix Error E18
DIY Fix Power cycle/reset the washing machine
- Turn off the washing machine at the mains
- Unplug the power cord from the wall outlet
- Wait at least 10 minutes to allow residual charge to dissipate
- Plug back in and power on to see if the error clears
Technician Only Inspect and repair/replace control board and wiring
- Disconnect power to the machine before servicing
- Remove access panels to inspect the main PCB and connectors
- Check for loose, burned, corroded, or damaged wiring between the user interface and main board
- Test control board components for faults with appropriate diagnostic tools
- Replace the main PCB (and associated connectors) if faulty
Parts needed: Main control PCB, Wiring harness/connectors
- If the error persists after a power reset
- If there is visible damage or burning on control board components
- If user lacks tools/experience to diagnose electrical/electronic faults
Next step
Choose the next step for E18
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 30-50 ohms |
| part_number | CANDY 41014412 |
| voltage_rating | 220V AC |
Common Questions
What does E18 error mean on Candy washing machine?
E18 indicates a drainage issue due to a control board malfunction, causing the machine to stop mid-cycle.
Can I fix Candy washing machine E18 error myself?
Yes, you can try power cycling the machine by unplugging it for 10 minutes.
How much does it cost to fix E18 error?
Repair costs for the E18 error typically range from €100 to €300+, depending on parts and model.
When should I call a technician for E18?
Call a technician if the error persists after a reset or if you notice damage on the control board.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!