Candy Washing Machine Error E17
⚡ Quick Answer: The Candy washing machine E17 error indicates a water inlet issue, preventing the machine from filling with water. This may be due to a faulty motor t... ✅ DIY Fixable
What Does Error E17 Mean?
The Candy washing machine E17 error indicates a water inlet issue, preventing the machine from filling with water. This may be due to a faulty motor tachometer or incorrect signals from the tachometric dynamo, leading to erratic motor behavior or a complete halt mid-cycle. A flashing display accompanies this error, signaling the need for immediate attention.
Common Symptoms:
- Washing machine stops mid‑cycle
- Motor may not spin or spin erratically
- Error code E17 shown on display (or equivalent light flash pattern)
Possible Causes
- Faulty motor tachometer (speed sensor) or incorrect signal from tachometric dynamo (medium)
- Wiring/connectivity issue between motor tachometer and control electronics (medium)
How to Fix Error E17
DIY Fix Basic checks before service
- Disconnect the washing machine from power.
- Check that the machine is on a stable surface and not overloaded.
- Restart the machine after a brief power disconnect to see if the error clears.
Technician Only Inspect and repair motor tachometer and related circuitry
- Verify continuity and signal integrity of the motor tachometer (speed sensor) wiring harness.
- Inspect the tachometer (tachometric dynamo) mounted on the motor for damage or fault.
- Test the motor control board input for correct tachometer signal; repair or replace as necessary.
- Replace the tachometer sensor if found defective.
Parts needed: Motor tachometer (speed sensor), Wiring harness/connectors, Control board if necessary
- If the error persists after basic reset attempts.
- If there are unusual noises, motor not spinning, or electrical smells.
- If you are not experienced with electrical/motor diagnostics.
Next step
Choose the next step for E17
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Water Inlet Valve |
| resistance | 10-20 ohms |
| part_number | CANDY 41010745 |
| voltage_rating | 220V AC |
Common Questions
What does E17 error mean on Candy washing machine?
E17 indicates a water inlet problem, often due to a faulty motor tachometer affecting the machine's ability to fill.
Can I fix Candy washing machine E17 error myself?
Yes, you can perform basic checks like restarting the machine after a power disconnect and ensuring it's stable and not overloaded.
How much does it cost to fix E17 error?
Repair costs vary, typically moderate for the tachometer sensor and labor, depending on your region and technician.
When should I call a technician for E17?
Call a technician if the error persists after resets, or if you hear unusual noises, see motor issues, or smell electrical odors.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!