Candy Washing Machine Error E14
⚡ Quick Answer: The Candy washing machine E14 error indicates a heating circuit fault, typically linked to a malfunctioning water inlet valve or issues with the heati... ✅ DIY Fixable
What Does Error E14 Mean?
The Candy washing machine E14 error indicates a heating circuit fault, typically linked to a malfunctioning water inlet valve or issues with the heating element. This error may prevent the machine from filling with water or cause wash programs to halt during heating. Symptoms include longer cycle times and an error display during operation. It’s essential to address this promptly to avoid further complications.
Common Symptoms:
- Wash programs stop or fail to progress when heating is required
- Longer cycle durations than expected
- Error displayed or flashes at start or during washing
Possible Causes
- Failed heating element (resistance fault or internal short) (medium)
- Control board heating circuit driver fault (relay/triac) (medium)
How to Fix Error E14
DIY Fix Basic checks before calling a technician
- Turn off and unplug the washing machine.
- Wait a few minutes then plug in and restart to see if the error clears (power reset).
- Ensure the machine was allowed to complete the previous cycle and wasn’t interrupted.
Technician Only Inspect and test heating circuit components
- Disconnect the machine from mains power.
- Remove the rear service panel to access the heater and temperature sensor.
- Measure the heating element resistance with a multimeter and compare to expected values.
- Test the temperature sensor (NTC) resistance at known temperatures to verify proper response.
- Inspect and clean connectors/cables in the heater/NTC circuit.
- Check control board heating driver components (relay/triac) for proper operation.
Parts needed: Heating element, Temperature sensor (NTC), Connectors and wiring in heating circuit, Control board (heating driver components)
- If the error persists after basic reset attempts
- If multimeter tests show heater or sensor out of specification
- If internal connectors or control board appear damaged
Next step
Choose the next step for E14
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Water Inlet Valve |
| resistance | 3-5 ohms |
| part_number | Candy 41010781 |
| voltage_rating | 220V AC |
Common Questions
What does E14 error mean on Candy washing machine?
E14 indicates a heating circuit fault, affecting water filling and cycle progression.
Can I fix Candy washing machine E14 error myself?
Yes, try a power reset and ensure the previous cycle completed.
How much does it cost to fix E14 error?
Repair costs range from €50 to €300+, depending on parts and service rates.
When should I call a technician for E14?
Call if the error persists after resetting or if tests show faults with components.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!