Candy Washing Machine Error E08
⚡ Quick Answer: The Candy washing machine E08 error indicates a motor drive or tachometer fault, typically resulting in the drum not rotating or stopping abruptly. Th... ✅ DIY Fixable
What Does Error E08 Mean?
The Candy washing machine E08 error indicates a motor drive or tachometer fault, typically resulting in the drum not rotating or stopping abruptly. This error often occurs during wash or spin cycles and may be accompanied by humming sounds as the motor attempts to start without success.
Common Symptoms:
- Drum does not rotate or stops shortly after starting
- Washer displays E08 and halts program
- Often occurs during attempt to spin or wash cycle
- Humming or attempt to start motor without actual rotation
Possible Causes
- Faulty or worn motor tachometer (motor speed sensor) (medium)
- Worn carbon brushes or motor wear (medium)
- Control electronics / triac or board motor drive issue (medium)
How to Fix Error E08
DIY Fix Basic checks and reset
- Disconnect the washing machine from power for 5–15 minutes and restart
- Ensure drum is not overloaded and tries a short spin cycle
- Check that the door closes correctly and latches fully
Technician Only Inspect motor, tachometer and motor drive circuitry
- Disconnect power and remove back panel to access motor and tachometer
- Measure tachometer output with a multimeter to confirm sensor failure
- Inspect and replace worn carbon brushes if low
- Check motor windings and motor drive TRIAC or related PCB components for faults
- Replace defective components as necessary
Parts needed: Motor tachometer / speed sensor, Motor brushes, Motor assembly, Motor drive Triac / PCB components
- If basic restart and load adjustment do not clear E08
- If you cannot safely access motor or electronics
- If error recurs after replacing brushes or sensor
Next step
Choose the next step for E08
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | CANDY 41014540 |
| voltage_rating | 230V AC |
Common Questions
What does E08 error mean on Candy washing machine?
E08 indicates a motor drive or tachometer fault, causing the drum to stop or not rotate.
Can I fix Candy washing machine E08 error myself?
Yes, try basic checks like restarting the machine and ensuring the drum is not overloaded.
How much does it cost to fix E08 error?
Repair costs for E08 can range from moderate to high, depending on parts and labor.
When should I call a technician for E08?
Call a technician if the error persists after basic troubleshooting or if you can't access the motor.
Sources & References
- Error E08 Lavatrice Candy – Come Risolvere (community)
- Error code E08 meaning and causes (community)
- Error Lavadora Candy E08 (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!