Candy Washing Machine Error E06

⚡ Quick Answer: The Candy washing machine E06 error indicates a malfunction in the door lock mechanism or an unbalanced load detected during the spin cycle. This can ... ✅ DIY Fixable

What Does Error E06 Mean?

The Candy washing machine E06 error indicates a malfunction in the door lock mechanism or an unbalanced load detected during the spin cycle. This can result in the machine stopping mid-cycle, the drum failing to rotate, or the door not opening or closing properly. If the error persists, it may be related to a motor or control circuitry issue.

Common Symptoms:

  • Washing machine stops mid‑cycle or fails to enter/complete spin
  • Drum does not rotate or rotates unevenly
  • E06 displayed on digital panel or indicated via LED flashes

Possible Causes

  • Unbalanced laundry load detected during spin (medium)
  • Motor drive, tachometer or control board related issue (medium)

How to Fix Error E06

DIY Fix Check and rebalance laundry load

  1. Pause the cycle and safely open the door if permitted by the model.
  2. Redistribute laundry evenly around the drum.
  3. Remove excess or singular heavy items (e.g., large towels) to balance load size.
  4. Restart the cycle to see if the error clears.

DIY Fix Level and stabilize the washing machine

  1. Ensure machine is unplugged before adjusting.
  2. Check that all feet are firmly on the floor and adjust leveling legs so the machine sits flat.
  3. Tighten lock nuts on the feet to maintain stability.
  4. Plug in and test a spin cycle.

Technician Only Inspect motor, tachometer, and control circuitry

  1. Disconnect appliance from power and remove access panels.
  2. Check motor wiring harness and connectors for damage or poor contact.
  3. Test motor brushes (if applicable) and replace if worn.
  4. Measure tachometer resistance/signals and inspect for faults.
  5. Diagnose control board motor drive components and replace board or motor assemblies if needed.

Parts needed: Motor assembly, Tachometer/speed sensor, Motor brushes (if equipped), Control PCB (motor drive section)

🛑 When to Call a Pro:
  • If the error persists after rebalancing laundry and stabilizing the appliance
  • If the drum will not spin at all or unusual noises occur
  • If internal motor or electronics faults are suspected

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number CANDY 41014480
voltage_rating 230V AC

Common Questions

What does E06 error mean on Candy washing machine?

E06 indicates a fault in the door lock or an unbalanced load during spin.

Can I fix Candy washing machine E06 error myself?

Yes, check and rebalance the load, and ensure the machine is level.

How much does it cost to fix E06 error?

Repair costs range from $100 to $350, depending on parts and service.

When should I call a technician for E06?

Call a technician if the error persists after rebalancing or if unusual noises occur.

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!