Candy Dryer Error E5
⚡ Quick Answer: The Candy dryer E5 error code signifies a malfunction with the front NTC temperature sensor, leading to a failure in producing heat during the drying ... ✅ DIY Fixable
What Does Error E5 Mean?
The Candy dryer E5 error code signifies a malfunction with the front NTC temperature sensor, leading to a failure in producing heat during the drying cycle. This issue can result in the dryer stopping heating properly, often indicated by the error code flashing five times before a pause. Commonly, the sensor may be faulty or obstructed with lint or debris, which can interfere with its operation.
Common Symptoms:
- Error appears during drying cycle
- Dryer may stop heating properly
- Error code displayed or flashes (five flashes between pauses)
Possible Causes
- Faulty front NTC temperature sensor (high)
- Sensor covered with lint or debris (medium)
How to Fix Error E5
DIY Fix Check lint and airflow around sensor area
- Turn off and unplug the dryer.
- Locate and remove the lint filter.
- Inspect and clean any visible lint or debris around the air intake and front sensor region.
- Ensure proper airflow pathways are clear.
- Reconnect power and run a test cycle to see if the error clears.
Technician Only Test and replace front NTC temperature sensor
- Disconnect power and gain access to the dryer’s front temperature sensor per model schematic.
- Check sensor resistance with a multimeter to confirm an open, shorted, or out‑of‑range reading.
- Inspect wiring and connectors for damage or loose contacts; repair as needed.
- Replace the front NTC temperature sensor if faulty and reassemble the dryer.
- Verify proper dryer operation after replacement.
Parts needed: Front NTC temperature sensor, Associated wiring/connectors
- If the error persists after cleaning lint and checking basic connections.
- If the sensor test indicates out‑of‑range values or wiring issues beyond simple user checks.
- If there are additional error codes or safety concerns (e.g., overheating).
Next step
Choose the next step for E5
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 2000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | CANDY 41020804 |
| voltage_rating | 230V AC |
Common Questions
What does E5 error mean on Candy dryer?
E5 error means there's a problem with the front NTC temperature sensor, causing heat failure.
Can I fix Candy dryer E5 error myself?
Yes, you can check for lint or debris around the sensor area and clean it.
How much does it cost to fix E5 error?
Repair costs are moderate, including sensor part and labor.
When should I call a technician for E5?
Call a technician if the error persists after cleaning or if there are additional error codes.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!