Candy Dryer Error E14

⚡ Quick Answer: The Candy dryer error E14 indicates a malfunction in the rear NTC temperature sensor, which can lead to the dryer failing to generate heat. Symptoms i... ✅ DIY Fixable

What Does Error E14 Mean?

The Candy dryer error E14 indicates a malfunction in the rear NTC temperature sensor, which can lead to the dryer failing to generate heat. Symptoms include incomplete drying cycles and laundry remaining cold. This issue may also stem from loose or damaged wiring, or communication faults between electronic components.

Common Symptoms:

  • Dryer cycle stops prematurely or fails to complete
  • Laundry feels cold or not drying properly
  • Error E14 displayed on control panel

Possible Causes

  • Rear NTC temperature sensor failure or incorrect reading (medium)
  • Loose, damaged, or corroded sensor wiring or connector (medium)
  • Communication fault between control/display PCB and main PCB (low)

How to Fix Error E14

DIY Fix Basic preliminary checks

  1. Turn off and unplug the dryer from the mains.
  2. Ensure the lint filter and condenser (if applicable) are clean to avoid airflow-related anomalies.
  3. Inspect the dryer environment (avoid very cold locations which might affect sensor readings).

Technician Only Diagnose and repair temperature sensor and wiring

  1. Disconnect power and remove necessary panels to access the rear NTC temperature sensor.
  2. Visually inspect harnesses and connectors for damage, corrosion, or loose fit; reseat if needed.
  3. Measure the NTC sensor resistance with a multimeter at room temperature to confirm if it is within expected range and changes with heat.
  4. Replace the NTC sensor if measurements are out of acceptable range.
  5. Check continuity and condition of wiring from sensor to main PCB.

Parts needed: Rear NTC temperature sensor, Wiring harness/connectors

Technician Only Inspect and repair control electronics if needed

  1. Check communication harness between display PCB and main PCB for continuity and secure fit.
  2. Inspect both PCBs for signs of damage (burn marks, cracked solder joints).
  3. Replace faulty display or main PCB if confirmed defective.

Parts needed: Display/control PCB, Main PCB

🛑 When to Call a Pro:
  • If you are uncomfortable accessing internal components
  • If multimeter testing does not clarify the cause
  • If PCB inspection indicates possible electronic board faults

Technical Specifications

wattage 2200W
component Heating Element
resistance 10-30 ohms
part_number CANDY 41020041
voltage_rating 230V AC

Common Questions

What does E14 error mean on Candy dryer?

E14 indicates a malfunction in the rear NTC temperature sensor, affecting heat production.

Can I fix Candy dryer E14 error myself?

Yes, you can perform basic checks like cleaning the lint filter and inspecting the sensor wiring.

How much does it cost to fix E14 error?

Repair costs range from low to moderate, depending on whether you replace the sensor or wiring.

When should I call a technician for E14?

Call a technician if you're uncomfortable with repairs or if testing doesn't clarify the issue.

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!