Candy Dryer Error E10
⚡ Quick Answer: The Candy dryer E10 error code indicates that the dryer has detected an empty or improperly balanced load in the drum. This often prevents the dryer f... ✅ DIY Fixable
What Does Error E10 Mean?
The Candy dryer E10 error code indicates that the dryer has detected an empty or improperly balanced load in the drum. This often prevents the dryer from starting or causing it to stop shortly after beginning a cycle. Ensuring a sufficient amount of laundry in the drum can help clear this error and allow for proper operation.
Common Symptoms:
- Error code E10 displays on the dryer panel when a cycle is started
- Dryer will not start or stops shortly after starting if E10 is shown
- Often appears when the drum is empty or load is uneven
Possible Causes
- Empty or insufficient load in drum (medium)
How to Fix Error E10
DIY Fix Check and adjust the dryer load
- Ensure the dryer drum contains a sufficient amount of laundry before starting a cycle.
- If drying a single large item (e.g., a duvet), add a few more items to balance the load.
- Restart the drying cycle to see if the error clears.
Technician Only Inspect load detection sensors and related components
- Disconnect power to the dryer before servicing.
- Inspect load/weight sensors or associated wiring for loose connections or damage.
- Test sensors with appropriate diagnostic tools and replace if faulty.
Parts needed: Load/weight sensor (if present), Sensor harness and connections
- If adjusting the load does not clear the E10 error and the machine repeatedly shows E10 despite proper loading.
- If internal sensors or wiring are suspected faulty and you lack appliance repair experience.
Next step
Choose the next step for E10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermal Fuse
A safety device that cuts off power to the appliance if it starts to overheat.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 2000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | Candy 41014544 |
| voltage_rating | 230V AC |
Common Questions
What does E10 error mean on Candy dryer?
E10 indicates an empty or unbalanced load in the dryer drum, preventing it from starting.
Can I fix Candy dryer E10 error myself?
Yes, check the load and ensure it is balanced before restarting the dryer.
How much does it cost to fix E10 error?
Estimated repair cost for E10 error ranges from ¥3,000 to ¥12,000, including parts and labor.
When should I call a technician for E10?
Contact a technician if adjusting the load doesn't clear the E10 error or if you suspect faulty sensors.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!