Candy Dryer Error E15
⚡ Quick Answer: The Candy dryer E15 error indicates a malfunction in the heating circuit, commonly due to a faulty heater relay on the control PCB. This issue prevent... ✅ DIY Fixable
What Does Error E15 Mean?
The Candy dryer E15 error indicates a malfunction in the heating circuit, commonly due to a faulty heater relay on the control PCB. This issue prevents the dryer from producing heat, which may cause cycles to stop prematurely or not start at all. Addressing the E15 error involves diagnosing the heating circuit and may require component replacement for a proper fix.
Common Symptoms:
- E15 appears at start or during cycle
- Dryer does not heat
- Cycle may stop early or not start heating
Possible Causes
- Faulty heater relay on control board (medium)
How to Fix Error E15
DIY Fix Basic checks and reset
- Unplug the dryer from mains power.
- Wait at least 10 minutes to allow residual charge to dissipate.
- Reconnect and try a short drying cycle to see if E15 returns.
- Ensure lint filters are clean and that airflow (condenser/vents) is not blocked.
Technician Only Diagnose and repair heating circuit
- Disconnect power and remove access panels to reach the main control PCB and heating area.
- Visually inspect the control PCB for signs of damage (burn marks, damaged relay).
- Test continuity of heating element, thermostats/thermal cut‑outs, and relay function with appropriate tools (multimeter).
- Replace the faulty heater relay or entire control PCB as required.
- Check and replace any failed thermostats or heating element if they show open circuits or fail tests.
Parts needed: Control PCB with heater relay, Heating element, Thermal cut‑outs/thermostats, Wiring harnesses
- If you are not experienced with mains‑voltage appliances or comfortable testing PCB/heating parts.
- If visual inspection shows water damage, severe PCB damage, or if initial basic checks do not resolve the issue.
Next step
Choose the next step for E15
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 2000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | CANDY 41013733 |
| voltage_rating | 230V AC |
Common Questions
What does E15 error mean on Candy dryer?
E15 indicates a heating circuit malfunction, often due to a faulty heater relay.
Can I fix Candy dryer E15 error myself?
Yes, you can perform basic checks and reset by unplugging the dryer and reconnecting after 10 minutes.
How much does it cost to fix E15 error?
Repair costs typically range from €120 to €350+, depending on parts and labor.
When should I call a technician for E15?
Call a technician if you're uncomfortable with electrical repairs or if initial checks do not resolve the issue.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!