Blomberg Washing Machine Error 9

⚡ Quick Answer: Blomberg Washing Machine error 9 indicates a program selector or control input fault. Users typically experience the error when attempting to start or... ✅ DIY Fixable

What Does Error 9 Mean?

Blomberg Washing Machine error 9 indicates a program selector or control input fault. Users typically experience the error when attempting to start or change cycles, with the washer failing to respond to the program dial or button inputs. This may be due to a faulty program selector switch or communication issues within the control system. Unusual noises during operation may also accompany this error, signaling a malfunction in the control panel.

Common Symptoms:

  • Error 9 appears on display when attempting to start or change cycle
  • Washer may not respond to program dial or button input
  • Cycle doesn’t start or immediately stops

Possible Causes

  • Faulty or mis‑communicating program selector switch (medium)

How to Fix Error 9

DIY Fix Basic checks and reset

  1. Turn off and unplug the washing machine for 1–2 minutes
  2. Plug back in and attempt to select a cycle again
  3. Ensure that the programme selector dial or buttons are being pressed correctly

Technician Only Inspect and repair selector and wiring

  1. Open the control panel to access the programme selector assembly
  2. Inspect the selector switch for signs of wear or damage
  3. Check wiring harnesses between the selector/display and main control board for loose connections, damage, or corrosion
  4. Replace faulty selector switch or repair wiring as needed

Parts needed: Program selector switch/dial, Wiring harness/connectors

🛑 When to Call a Pro:
  • If the error persists after reset
  • If you are not comfortable opening the control panel or working with wiring
  • If visible damage to electronics is present

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number BLM-DRP-001
voltage_rating 240V AC

Common Questions

What does 9 error mean on Blomberg Washing Machine?

Error 9 indicates a program selector or control input fault, preventing cycle start or changes.

Can I fix Blomberg Washing Machine 9 error myself?

Yes, try resetting the machine by unplugging it for 1-2 minutes and checking the program selector.

How much does it cost to fix 9 error?

Repair costs range from €40 to €120, including parts and labor.

When should I call a technician for 9?

Call a technician if the error persists after a reset or if you notice visible damage to the electronics.

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!