Blomberg Washing Machine Error 18
⚡ Quick Answer: The Blomberg Washing Machine error code 18 indicates a drainage issue primarily caused by incorrect mains supply voltage or frequency. This error ofte... ✅ DIY Fixable
What Does Error 18 Mean?
The Blomberg Washing Machine error code 18 indicates a drainage issue primarily caused by incorrect mains supply voltage or frequency. This error often presents with a display warning and may cause the machine to stop mid-cycle or fail to start. To resolve this, check the electrical supply to ensure it meets the required specifications.
Common Symptoms:
- Washer displays code 18 on control panel
- Machine may stop mid‑cycle or refuse to start
Possible Causes
- Incorrect mains supply voltage or frequency (medium)
How to Fix Error 18
DIY Fix Check mains electrical supply
- Ensure the washing machine is plugged into a properly grounded outlet.
- Verify that household voltage and frequency meet the machine’s specified requirements.
- Check that circuit breakers or fuses feeding the outlet are not tripped or blown.
- Try another outlet or household circuit if available.
Technician Only Inspect and correct electrical supply and components
- Measure incoming mains voltage and frequency at the machine’s power inlet with appropriate tools.
- Inspect the washer’s power cord and internal power connections for damage.
- Check the main control board’s power regulation circuitry for faults.
- Replace any damaged components that affect power delivery if necessary.
Parts needed: Multimeter, Power cord (if damaged), Control board (if fault is internal)
- If mains voltage/frequency cannot be verified safely
- If internal wiring, control board, or electrical components show signs of damage
Next step
Choose the next step for 18
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Power Cord
Supplies mains power to the appliance and includes the model-specific plug and terminal connection.
- Typical part-only price
- $15 - $70
- DIY difficulty
- Medium
- Estimated time
- 20-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does 18 error mean on Blomberg Washing Machine?
Error 18 signifies a drainage issue caused by incorrect mains supply voltage or frequency.
Can I fix Blomberg Washing Machine 18 error myself?
Yes, check the mains electrical supply and ensure proper voltage and frequency.
How much does it cost to fix 18 error?
Repair costs range from ¥10,000 to ¥30,000+, depending on parts and labor.
When should I call a technician for 18?
Call a technician if you cannot verify the mains voltage or if internal components show damage.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!