Blomberg Washing Machine Error 13
⚡ Quick Answer: The Blomberg Washing Machine error 13 indicates a malfunction in the door lock mechanism, which may prevent the door from opening or closing properly.... ✅ DIY Fixable
What Does Error 13 Mean?
The Blomberg Washing Machine error 13 indicates a malfunction in the door lock mechanism, which may prevent the door from opening or closing properly. This error often occurs when the machine cannot reach or maintain the required spin speed during the spin cycle. Symptoms include premature stopping during the spin cycle, failure to reach expected spin speed, and the display of ER13 or 13 on the control panel.
Common Symptoms:
- Washer during spin cycle stops early
- Drum does not reach expected spin speed
- Washer may display ER13 or 13 on control panel
Possible Causes
- Motor tachometer (speed sensor) fault (medium)
- Load imbalance or unbalanced drum condition (medium)
- Drive belt wear/slip or mechanical resistance (low)
How to Fix Error 13
DIY Fix Check load balance and reset machine
- Stop the current cycle and redistribute laundry to balance the load evenly around the drum.
- Remove some items if the machine is overloaded, then attempt a new spin cycle.
- Power off the washer, wait 60 seconds, and power it back on to see if the error clears.
Technician Only Inspect motor speed components
- Disconnect power to the washer before servicing.
- Access the motor area to inspect the tachometer or motor speed sensor connections for damage or loose wiring.
- Test the tachometer/speed sensor with appropriate diagnostic tools and replace if defective.
- Inspect the motor drive belt (if applicable) for wear or slipping and replace as necessary.
Parts needed: motor tachometer/speed sensor, drive belt (if used)
- If the error persists after balancing the load and resetting.
- If there are signs of motor or sensor electrical faults (burnt smell, erratic behavior).
Next step
Choose the next step for 13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drive Belt
Transfers rotational power from the motor to turn the drum or tub.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 20-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does 13 error mean on Blomberg Washing Machine?
Error 13 means a malfunction in the door lock mechanism or failure to achieve the required spin speed.
Can I fix Blomberg Washing Machine 13 error myself?
Yes, try redistributing the load, removing overload, and resetting the machine.
How much does it cost to fix 13 error?
Repair costs range from $50 to $250, depending on parts and labor.
When should I call a technician for 13?
Call a technician if the error persists after attempting to fix it or if you notice electrical faults.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!