Blomberg Washing Machine Error 10
⚡ Quick Answer: The Blomberg Washing Machine error code 10 indicates an overfill condition due to a malfunction in the water level sensor or inlet valve. Symptoms inc... ✅ DIY Fixable
What Does Error 10 Mean?
The Blomberg Washing Machine error code 10 indicates an overfill condition due to a malfunction in the water level sensor or inlet valve. Symptoms include excess water in the drum, continuous filling, or the machine failing to start or complete cycles. This issue may arise from a faulty water level sensor, a stuck inlet valve, or control board problems affecting water regulation.
Common Symptoms:
- Washing machine displays error code 10
- Excess water in drum or continuous filling behavior
- Cycle stops or won’t proceed due to detected overfill
Possible Causes
- Faulty or misreading water level/pressure sensor (medium)
- Inlet valve stuck open or malfunctioning (medium)
- Control board or wiring fault affecting water level regulation (medium)
How to Fix Error 10
DIY Fix Basic checks for water overfill
- Turn off and unplug the washer before any checks.
- Ensure water supply valves are not leaking or partially open when machine off.
- Check that inlet hoses aren’t leaking and are securely connected.
- Run a short cycle and watch if the machine overfills immediately.
Technician Only Diagnose and repair overfill fault
- Test the water level/pressure sensor for correct operation and replace if defective.
- Inspect and test the water inlet valve for proper open/close function; replace if it fails to close.
- Check wiring harnesses related to the level sensor and inlet valve for damage or loose connections.
- Evaluate the control board for faults in water-level regulation circuitry and replace if confirmed faulty.
Parts needed: Water level/pressure sensor, Water inlet valve, Control board, Relevant wiring harnesses
- If the machine continues to overfill rapidly or leaks water externally
- If the error persists after basic checks and resets
- If you are not comfortable working around water and electrical components
Next step
Choose the next step for 10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Mechanism |
| resistance | 10-20 ohms |
| part_number | BLM-LOCK-10 |
| voltage_rating | 120V AC |
Common Questions
What does 10 error mean on Blomberg Washing Machine?
Error 10 indicates an overfill condition, often due to a malfunctioning water level sensor or inlet valve.
Can I fix Blomberg Washing Machine 10 error myself?
Yes, you can perform basic checks like ensuring water supply valves are not leaking or partially open.
How much does it cost to fix 10 error?
Repair costs range from ¥10,000 to ¥40,000+, depending on parts and labor.
When should I call a technician for 10?
Call a technician if the machine continues to overfill or if the error persists after basic troubleshooting.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!