Blomberg Washing Machine Error 6
⚡ Quick Answer: The Blomberg washing machine error code 6 indicates a malfunction related to the motor tachometer, which can lead to issues such as the drum not rotat... ⚠️ Difficulty Varies
What Does Error 6 Mean?
The Blomberg washing machine error code 6 indicates a malfunction related to the motor tachometer, which can lead to issues such as the drum not rotating or the cycle stopping unexpectedly. This error typically arises from a failure in the motor speed sensor, damaged wiring, or worn motor brushes, causing the machine to fail to receive proper RPM feedback during operation.
Common Symptoms:
- Error code E06 displayed during wash or spin phase
- Drum does not rotate or struggles to turn
- Cycle stops unexpectedly when attempting to spin
Possible Causes
- Tachometer (motor speed sensor) failure or no RPM feedback (medium)
- Wiring/connectors to motor or tachometer sensor damaged or loose (medium)
- Motor brushes worn (medium)
How to Fix Error 6
DIY Fix Basic checks and reset
- Turn off the washing machine and unplug it from the outlet.
- Wait 1–2 minutes, then plug it back in and power on.
- Restart a wash cycle and see if the E06 code returns.
- Ensure the load is balanced and not excessively heavy.
Technician Only Inspect motor, tachometer/speed sensor, and related wiring
- Disconnect power and remove access panels to reach the motor and control area.
- Check the tachometer (motor speed sensor) for continuity and correct mounting.
- Inspect wiring harnesses and connectors between the motor, tachometer, and control board for damage or loose connections.
- If applicable for your model, inspect motor brushes for wear and replace if worn.
- Test the motor drive module and replace any defective components.
Parts needed: Motor tachometer/speed sensor, Motor brushes (if applicable), Wiring harness/connectors, Motor drive module (if required)
- If the error persists after reset and basic checks
- If you are not comfortable inspecting electrical connections or internal components
- If testing reveals a defective motor tachometer or major motor fault
Next step
Choose the next step for 6
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does 6 error mean on Blomberg washing machine?
Error 6 signifies a motor tachometer failure, affecting drum rotation and cycle completion.
Can I fix Blomberg washing machine 6 error myself?
Yes, you can perform basic checks and resets, but deeper inspections may require a technician.
How much does it cost to fix 6 error?
Repair costs range from moderate to high, depending on parts and labor required.
When should I call a technician for 6?
Call a technician if the error persists after resetting or if you’re uncomfortable with electrical inspections.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!