Blomberg Washing Machine Error 3
⚡ Quick Answer: The Blomberg washing machine error code 3 indicates a malfunction in the heating system, preventing the washer from heating water to the selected temp... ✅ DIY Fixable
What Does Error 3 Mean?
The Blomberg washing machine error code 3 indicates a malfunction in the heating system, preventing the washer from heating water to the selected temperature. This often leads to prolonged wash cycles and ineffective cleaning due to the water not reaching the intended temperature. Key components that could be at fault include a faulty heating element or a defective temperature sensor.
Common Symptoms:
- Cycle stops or delays during heating phase
- Water does not reach the expected temperature
- Longer wash times than normal
Possible Causes
- Faulty heating element (medium)
- Defective temperature sensor / thermostat (NTC) (medium)
- Wiring or connection issue between heater components and control board (medium)
How to Fix Error 3
DIY Fix Basic checks before calling service
- Turn off the washer and unplug it from power.
- Check that the selected wash cycle includes heating.
- Run a wash cycle without the heating function (e.g., cold wash) to isolate the heating issue.
Technician Only Diagnose and repair heating circuit
- Test the heating element for continuity using a multimeter; replace if it fails.
- Check the NTC temperature sensor/thermostat for proper resistance values; replace if out of spec.
- Inspect wiring and connectors between the control board, heating element, and temperature sensors; repair or replace any damaged components.
- Verify control board functionality related to the heating circuit.
Parts needed: Heating element, NTC temperature sensor / thermostat, Wiring harnesses, Potential control board
- If the error code persists after basic checks or occurs during every cycle.
- If you are not experienced with high-voltage appliance components.
- If heating element or control board diagnostics indicate component failure.
Next step
Choose the next step for 3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 1-5 ohms |
| part_number | Blomberg 280020 |
| voltage_rating | 120V AC |
Common Questions
What does 3 error mean on blomberg washing machine?
Error 3 indicates a heating malfunction, preventing the washer from reaching the selected water temperature.
Can I fix blomberg washing machine 3 error myself?
Yes, check the wash cycle settings and run a cold wash to isolate the issue before seeking repairs.
How much does it cost to fix 3 error?
Repair costs for error 3 typically range from $100 to $350, depending on the required parts and labor.
When should I call a technician for 3?
Call a technician if the error persists after basic checks or if you are uncomfortable with high-voltage repairs.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!