Beko Washing Machine Error H06

⚡ Quick Answer: The H06 error code on a Beko washing machine indicates a malfunction in the drum's ability to spin, often linked to issues with the motor or its compo... ✅ DIY Fixable

What Does Error H06 Mean?

The H06 error code on a Beko washing machine indicates a malfunction in the drum's ability to spin, often linked to issues with the motor or its components. This may result in the machine being unresponsive during cycle start, with the H06 code displayed. Ensure that the drum can rotate freely and that there are no obstructions preventing movement. If the problem persists, further diagnosis of the motor circuit may be required.

Common Symptoms:

  • Drum fails to spin when wash or spin cycle starts
  • Machine may be unresponsive to cycle start with H06 displayed
  • No unusual water inlet/drainage issues accompanying the code

Possible Causes

  • Motor or motor‑related component fault (medium)
  • Obstruction preventing drum rotation (low)

How to Fix Error H06

DIY Fix Basic checks for H06 before calling service

  1. Turn off the machine and disconnect power
  2. Check if the drum can be rotated freely by hand with the machine off and empty
  3. Ensure laundry is not jammed between the drum and tub
  4. Restart the cycle after redistributing clothes evenly

Technician Only Diagnose and repair motor/motor circuit issues

  1. Disconnect power and remove the rear or front panel to access the motor
  2. Inspect motor brushes for wear and replace if necessary
  3. Check motor wiring harness and connectors for damage or poor connection
  4. Test the motor control triac on the main board or dedicated motor driver board and replace if faulty
  5. Verify drum bearings and motor tachometer (if present) for faults

Parts needed: motor assembly, motor brushes (if applicable), motor wiring harness, triac or motor driver board

🛑 When to Call a Pro:
  • If drum does not rotate freely by hand
  • If motor brushes are worn or damaged
  • If motor control circuitry is suspected to be faulty

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number Beko 2801510100
voltage_rating 230V AC

Common Questions

What does H06 error mean on Beko washing machine?

The H06 error indicates a malfunction preventing the drum from spinning, often due to motor issues.

Can I fix Beko washing machine H06 error myself?

Yes, you can perform basic checks like ensuring the drum spins freely and checking for laundry obstructions.

How much does it cost to fix H06 error?

The estimated repair cost ranges from ¥10,000 to ¥40,000, depending on parts and labor.

When should I call a technician for H06?

Call a technician if the drum does not rotate freely by hand or if motor components are suspected to be faulty.

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!