Beko Washing Machine Error E16

⚡ Quick Answer: The Beko washing machine error code E16 indicates a water inlet or fill fault, typically resulting in the machine not filling with water within the ex... ✅ DIY Fixable

What Does Error E16 Mean?

The Beko washing machine error code E16 indicates a water inlet or fill fault, typically resulting in the machine not filling with water within the expected time. You may notice unusual sounds during the spin cycle and a water level warning displayed. This issue often stems from a blocked inlet hose, a malfunctioning water inlet valve, or problems with the water supply.

Common Symptoms:

  • Machine won’t fill with water within expected time
  • Cycle stops early with error displayed before or during fill phase
  • No/slow water entering drum

Possible Causes

  • Water inlet supply/fill fault (medium)

How to Fix Error E16

DIY Fix Check water supply and inlet hose

  1. Ensure tap supplying washer is fully open
  2. Inspect inlet hose for kinks, bends or restrictions
  3. Check inlet hose connection at washer and wall
  4. Power cycle machine

DIY Fix Clean inlet filters

  1. Turn off water supply at the tap
  2. Disconnect inlet hose from machine
  3. Locate mesh filter inside inlet port on washer
  4. Rinse filter to remove debris and sediment
  5. Reinstall hose and secure connection
  6. Turn water back on and test machine

Technician Only Inspect/replace inlet valve or control components

  1. Test water inlet valve solenoids for proper operation and continuity
  2. Check wiring harness from valve to board
  3. Use multimeter to verify proper water level sensor and PCB signals
  4. Replace faulty inlet valve or control board as needed

Parts needed: water inlet valve, inlet hose, control board, pressure/flow sensors

🛑 When to Call a Pro:
  • If error persists after checking supply/hose/filter
  • If water inlet valve shows no electrical response
  • If internal wiring or PCB faults are suspected
  • If you’re uncomfortable with electrical/multi‑component diagnostics

Technical Specifications

wattage 100W
component Drain Pump
resistance 20-40 ohms
part_number Beko 280007123
voltage_rating 240V AC

Common Questions

What does E16 error mean on Beko washing machine?

E16 error indicates a water inlet or fill fault, leading to slow or no water entering the drum.

Can I fix Beko washing machine E16 error myself?

Yes, you can check the water supply, inspect the inlet hose for kinks, and clean inlet filters.

How much does it cost to fix E16 error?

Repair costs for E16 error can range from $80 to $300+, depending on parts and model.

When should I call a technician for E16?

Call a technician if the error persists after DIY checks or if electrical component issues are suspected.

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!