Beko Washing Machine Error E15
⚡ Quick Answer: The E15 error code on your Beko washing machine indicates a potential water leakage detection issue. This may cause the machine to stop mid-cycle, alo... ✅ DIY Fixable
What Does Error E15 Mean?
The E15 error code on your Beko washing machine indicates a potential water leakage detection issue. This may cause the machine to stop mid-cycle, along with symptoms like improper water drainage or filling. It's essential to check for any pooling water under the machine and ensure that water supply taps are fully open and hoses are free from kinks or blockages. If the problem persists, further inspection may be necessary.
Common Symptoms:
- Machine stops mid‑cycle
- Water not draining or filling correctly
- Error display shows E15
Possible Causes
- Water level sensor
- Hoses and connections
- Drain pump
How to Fix Error E15
DIY Fix Basic checks and troubleshooting
- Turn off and unplug the washing machine
- Check that water supply taps are fully open
- Ensure inlet and drain hoses are not kinked or blocked
- Check that the machine is level and not overloaded
Technician Only Diagnostic inspection
- Use service diagnostic mode to check error memory if available
- Inspect water level sensor/pressure switch for correct operation
- Check inlet valve and drain pump operation
- Verify wiring and connections related to water level control
Parts needed: pressure switch/water level sensor, inlet valve, drain pump, wiring harness
- If error persists after basic checks
- If there is evidence of internal leaks or persistent non‑drainage
Technical Specifications
| wattage | 2000W |
|---|---|
| component | Water Level Sensor |
| resistance | 10-20 ohms |
| part_number | Beko 2801700100 |
| voltage_rating | 220-240V AC |
Common Questions
What does E15 error mean on beko washing machine?
E15 error indicates a water leakage detection issue, often causing the machine to stop mid-cycle.
Can I fix beko washing machine E15 error myself?
Yes, you can perform basic checks like ensuring water supply taps are open and hoses aren't kinked.
How much does it cost to fix E15 error?
Repair costs for E15 error range from $50 to $200+ depending on parts and labor.
When should I call a technician for E15?
Call a technician if the error persists after basic checks or if you notice internal leaks.
Sources & References
- Generic BEKO washing machine error code guides (community)
Data last verified: 2026-01-14
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!