Beko Washing Machine Error E13
⚡ Quick Answer: The Beko washing machine error code E13 indicates a drainage issue or a communication failure between the main control board and the inverter/motor co... ✅ DIY Fixable
What Does Error E13 Mean?
The Beko washing machine error code E13 indicates a drainage issue or a communication failure between the main control board and the inverter/motor control board, particularly in BLDC motor models. Symptoms include the washer failing to drain water, the drum not turning, or the wash cycle aborting prematurely with water pumped out. To address this issue, users may need to check the pressure switch and ensure there are no blockages in the drainage system.
Common Symptoms:
- Washer empties water and won’t start a wash cycle (reported in community video guide).
- Drum not turning or wash cycle aborts with water pumped out prematurely (user repair case).
Possible Causes
- Motor/inverter communication fault (medium)
- Water pressure sensor / level switch malfunction (leading to cycle abort) (medium)
How to Fix Error E13
DIY Fix Basic reset and pressure switch check
- Turn off and unplug the washing machine.
- Wait 5–10 minutes and plug it back in to see if the error clears.
- Ensure water supply is on and hoses aren’t kinked.
- Check the pressure switch hose for kinks/blockages (if accessible).
- Restart a short wash program to see if error persists.
Technician Only Inspect motor communication and internal components
- Enter diagnostic mode to confirm E13 stored fault.
- Check wiring between main control board and motor/inverter assembly for continuity and secure connections.
- Test the pressure switch and level sensor for proper operation with multimeter.
- Test motor communication signals on BLDC drive models; replace defective inverter board or main control board if required.
Parts needed: Multimeter, BLDC motor inverter board (if applicable), Main control board (if necessary), Pressure switch/level sensor
- If error reappears after basic reset and pressure switch checks.
- If internal wiring inspection shows burnt connectors, or motor/inverter faults are suspected.
- If main control board or inverter replacement is indicated.
Next step
Choose the next step for E13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 120W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Beko 2802000100 |
| voltage_rating | 240V AC |
Common Questions
What does E13 error mean on beko washing machine?
E13 indicates a drainage issue or communication failure related to the main control and inverter boards.
Can I fix beko washing machine E13 error myself?
Yes, try a basic reset and check the pressure switch and drainage system for blockages.
How much does it cost to fix E13 error?
Repair costs range from ¥15,000 to ¥60,000+, depending on parts and service rates.
When should I call a technician for E13?
Call a technician if the error persists after a reset or if internal wiring issues are suspected.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!