Beko Washing Machine Error E09

⚡ Quick Answer: The Beko washing machine error E09 typically indicates a malfunction in the drain system, often manifesting as water remaining in the drum, unusual so... ✅ DIY Fixable

What Does Error E09 Mean?

The Beko washing machine error E09 typically indicates a malfunction in the drain system, often manifesting as water remaining in the drum, unusual sounds during the spin cycle, or the machine stopping mid-cycle. This error may arise from a blocked or improperly installed drain hose, pressure sensing issues, or faults in the control board and power supply. Addressing the drain hose and pump filter can resolve the issue, but persistent errors may require professional inspection of the control board.

Common Symptoms:

  • Machine stops mid‑cycle
  • Water remains in drum or fails to drain
  • Error appears immediately on start or shortly after

Possible Causes

  • Blocked or improperly installed drain system / pressure sensing issue (medium)
  • Control board / power supply fault including PCB issues (low)

How to Fix Error E09

DIY Fix Basic Checks Before Professional Service

  1. Power off the machine and unplug it.
  2. Check the drain hose for kinks, blockages, and correct height.
  3. Clean the pump filter and drain hose entry.
  4. Attempt a power reset by unplugging for 5–10 minutes then reconnecting and restarting a wash cycle.

Technician Only Inspect Pressure System and Control Board

  1. Verify drain hose installation height and condition.
  2. Inspect and test pressure switch and pressure hose for blockages or splits.
  3. Check for continuity and proper operation of the pressure switch.
  4. Inspect main control board (PCB) for burnt components, loose connections, or surge damage.
  5. Test control board power supply behavior and replace PCB or faulty parts if confirmed.

Parts needed: pressure switch, pressure hose, drain hose, control board (PCB)

🛑 When to Call a Pro:
  • If error returns after basic drain/pressure troubleshooting
  • If E09 appears immediately upon power on and doesn’t clear
  • If visual signs of PCB damage (burnt components) are evident

Technical Specifications

wattage 120W
component Drain Pump
resistance 20-30 ohms
part_number Beko 280007
voltage_rating 240V AC

Common Questions

What does E09 error mean on Beko washing machine?

E09 indicates a malfunction in the drain system, causing water to remain in the drum and the machine to stop mid-cycle.

Can I fix Beko washing machine E09 error myself?

Yes, you can check for kinks or blockages in the drain hose and clean the pump filter before seeking professional help.

How much does it cost to fix E09 error?

Repair costs for the E09 error typically range from $100 to $350+, depending on parts and service fees.

When should I call a technician for E09?

Call a technician if the error persists after basic troubleshooting or if it appears immediately upon powering on.

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!