Beko Washing Machine Error C2
⚡ Quick Answer: The Beko washing machine C2 error indicates a drainage issue, where the machine fails to drain water within the expected time. Symptoms include water ... ✅ DIY Fixable
What Does Error C2 Mean?
The Beko washing machine C2 error indicates a drainage issue, where the machine fails to drain water within the expected time. Symptoms include water remaining in the drum after a cycle, the cycle stopping mid-wash, and unusual noises around the pump or filter area. This error is commonly caused by a clogged drain pump filter or drain hose. In some cases, a faulty drain pump may also be responsible.
Common Symptoms:
- Water remains in drum after or during cycle
- Cycle stops mid‑wash
- Possible unusual noise around water pump/pump filter area
Possible Causes
- Clogged drain pump filter or drain hose (medium)
- Faulty drain pump (low)
How to Fix Error C2
DIY Fix Check and clear drain path
- Turn off and unplug the washing machine.
- Locate the pump filter access panel at the front bottom of the machine.
- Place a tray and towel underneath, open the panel, and slowly unscrew the filter to drain residual water.
- Inspect and remove lint, coins, debris from the pump filter.
- Check the drain hose for kinks or blockages and straighten/clean as needed.
- Replace the filter, secure panel, plug in, and restart a wash cycle.
Technician Only Inspect and service drain pump assembly
- Confirm if the drain pump receives power and spins freely when commanded.
- Check for internal impeller damage or obstruction inside the pump housing.
- Test drain pump electrical continuity and replace if out of spec.
- Verify correct drain hose routing and height relative to machine base.
- Check related sensors that detect water level/drain completion.
Parts needed: drain pump, drain hose, pump filter assembly
- Water continues to remain after clearing filter and hose, indicating possible internal pump or sensor failure.
- Unusual noises or leaks when machine attempts to drain.
- Error persists after basic user‑level troubleshooting.
Next step
Choose the next step for C2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Beko 2802000200 |
| voltage_rating | 240V AC |
Common Questions
What does C2 error mean on Beko washing machine?
C2 error indicates a drainage problem, often with water remaining in the drum and unusual noises.
Can I fix Beko washing machine C2 error myself?
Yes, you can check and clear the drain path by accessing the pump filter.
How much does it cost to fix C2 error?
Repair costs range from ¥8,000 to ¥25,000, depending on parts and labor.
When should I call a technician for C2?
Call a technician if water remains after clearing the filter, or if unusual noises occur.
Sources & References
- Beko Washing Machine Fault Codes – Fast Repair (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!