Beko Oven Error E06

⚡ Quick Answer: The Beko oven error E06 indicates a malfunction related to the grill element or the control panel communication. This error may cause the grill (top h... ⚠️ Difficulty Varies

What Does Error E06 Mean?

The Beko oven error E06 indicates a malfunction related to the grill element or the control panel communication. This error may cause the grill (top heating element) to fail to heat, resulting in erratic temperature readings or unresponsive touch controls. To resolve the issue, visual inspections and resets can be attempted, but if the problem persists, further inspection of the grill element and control panel circuitry may be necessary.

Common Symptoms:

  • Oven displays E06 on the control panel.
  • Grill (top heating element) does not heat when the error appears.
  • Touch controls may be unresponsive or erratic.

Possible Causes

  • Grill element or grill circuit fault (medium)
  • User interface / control panel communication fault (medium)

How to Fix Error E06

DIY Fix Basic visual checks and power reset

  1. Turn off and unplug the oven from mains power.
  2. Wait at least 5 minutes before reconnecting to allow residual charge to dissipate.
  3. Power on and check if the error persists.
  4. Visually inspect the oven interior for obvious damage to the grill element or control panel area without opening covers.

Technician Only Inspect and test grill element and control panel circuitry

  1. Disconnect the oven from power and remove access panels.
  2. Measure resistance across the grill element; open-circuit indicates failure.
  3. Inspect wiring connectors for damage or loose connections.
  4. Test continuity and communication between the touch control panel and main PCB.
  5. Replace faulty grill element, ribbon cable, touch panel, or control board as needed.

Parts needed: Grill heating element, Control panel / user interface board, Main control board, Ribbon/control cables

🛑 When to Call a Pro:
  • If you are not confident working with electrical components.
  • If visual inspection and reset do not resolve the error.
  • If resistance measurements or continuity tests show component faults.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 1000-2000 ohms
part_number Beko 280100015
voltage_rating 240V AC

Common Questions

What does E06 error mean on beko oven?

E06 indicates a malfunction with the grill element or control panel, causing heating issues.

Can I fix beko oven E06 error myself?

Yes, try performing a power reset and checking for visible issues before seeking professional help.

How much does it cost to fix E06 error?

Repair costs vary based on parts and labor, typically ranging from modest to moderate for grill element or interface board replacement.

When should I call a technician for E06?

Call a technician if you are unsure about handling electrical components or if the issue persists after a reset.

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!