Beko Oven Error E01
⚡ Quick Answer: The Beko oven error E01 signals a malfunction in the temperature sensor, specifically the NTC probe. This can lead to the oven failing to heat properl... ✅ DIY Fixable
What Does Error E01 Mean?
The Beko oven error E01 signals a malfunction in the temperature sensor, specifically the NTC probe. This can lead to the oven failing to heat properly, displaying erratic temperature readings, or not heating at all when a cooking mode is selected. Common causes include a faulty temperature sensor or damaged wiring. Troubleshooting should start with power cycling the oven and ensuring the door is fully closed.
Common Symptoms:
- Oven will not heat when a cooking mode is selected
- Error E01 appears shortly after trying to heat the oven
- Incorrect or erratic temperature readings on display
Possible Causes
- Faulty or open‑circuit oven temperature sensor (NTC probe) (medium)
- Damaged sensor wiring or connection (medium)
How to Fix Error E01
DIY Fix Power reset and basic checks
- Turn off the oven and disconnect it from mains power (unplug or switch off breaker).
- Wait a few minutes and reconnect power to see if the error clears.
- Ensure the oven door is fully closed and no debris/blockage interferes with door operation.
Technician Only Inspect and test the temperature sensor and wiring
- Disconnect oven from power.
- Access the temperature sensor (usually at the rear oven wall).
- Visually inspect sensor and wiring for burns, breaks, or loose connectors.
- Use a multimeter to measure sensor resistance at room temperature and verify it falls within the expected range.
- Replace the sensor and/or repair wiring harness if tests fail.
Parts needed: Oven temperature sensor (NTC probe), Wiring harness/connectors
- If the E01 error persists after power reset and basic checks
- If resistance testing of the sensor is outside expected values
- If you are uncomfortable working with live electrical components
Next step
Choose the next step for E01
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-2000 ohms |
| part_number | Beko 2800320300 |
| voltage_rating | 240V AC |
Common Questions
What does E01 error mean on beko oven?
E01 indicates a malfunction in the temperature sensor, causing heating issues.
Can I fix beko oven E01 error myself?
Yes, you can try power resetting and checking the door for blockages.
How much does it cost to fix E01 error?
Repair costs range from ¥3,000 to ¥15,000, depending on the sensor and labor.
When should I call a technician for E01?
Call a technician if the error persists after troubleshooting or if you're unsure about handling electrical components.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!