Beko Oven Error E04

⚡ Quick Answer: The Beko oven error E04 indicates a malfunction in the cooling fan or overheat thermostat, often preventing the oven from heating or starting a new co... ✅ DIY Fixable

What Does Error E04 Mean?

The Beko oven error E04 indicates a malfunction in the cooling fan or overheat thermostat, often preventing the oven from heating or starting a new cooking cycle. Symptoms may include the E04 display when attempting to start, continuous operation of the cooling fan, and a lack of heat during cooking. Addressing this issue typically involves inspecting and possibly replacing the cooling fan assembly or the overheat safety thermostat.

Common Symptoms:

  • Oven display shows E04 when attempting to start a cycle.
  • Cooling fan runs continuously or unexpectedly.
  • Oven may not heat or start a new cooking cycle.

Possible Causes

  • Cooling fan failure (motor or impeller jammed/faulty) (medium)
  • Overheat safety thermostat (thermal cutoff) open/tripped (medium)

How to Fix Error E04

DIY Fix Basic Checks and Power Reset

  1. Turn off the oven and disconnect it from mains power (unplug or switch off at breaker).
  2. Wait a few minutes to allow internal electronics to reset.
  3. Ensure ventilation around the oven is not blocked and remove any foil or obstructions near vents.

Technician Only Inspect and Replace Cooling Fan or Overheat Thermostat

  1. Disconnect mains power and allow oven to cool fully.
  2. Remove access panels to reach the oven’s cooling fan and overheat thermostat.
  3. Inspect fan blades and motor; manually spin fan to check for free motion and absence of rubbing.
  4. Test fan motor for continuity; replace if open/failed.
  5. Locate the overheat thermostat and test for continuity; reset (if equipped) or replace if open.
  6. Reassemble and test oven operation to confirm E04 no longer appears.

Parts needed: Cooling fan assembly/motor, Overheat/safety thermostat

🛑 When to Call a Pro:
  • If you are not comfortable working with mains electricity or accessing internal components.
  • If the oven continues to display E04 after fan and thermostat tests/replacements.

Technical Specifications

wattage 2000W
component Heating Element
resistance 10-30 ohms
part_number Beko 280000008
voltage_rating 240V AC

Common Questions

What does E04 error mean on Beko oven?

E04 indicates a cooling fan or overheat thermostat malfunction, preventing heating or starting a cycle.

Can I fix Beko oven E04 error myself?

Yes, you can perform basic checks and power resets, but further inspection may require a technician.

How much does it cost to fix E04 error?

The estimated repair cost for E04 is moderate, including parts and labor.

When should I call a technician for E04?

Call a technician if you're uncomfortable with electrical components or if E04 persists after basic troubleshooting.

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!