Asko Washing Machine Error F8
⚡ Quick Answer: The ASKO washing machine error F8 typically indicates a drainage issue, preventing the machine from completing cycles and displaying an error message.... ✅ DIY Fixable
What Does Error F8 Mean?
The ASKO washing machine error F8 typically indicates a drainage issue, preventing the machine from completing cycles and displaying an error message. If you encounter this error, verify your model number and check the user manual for specific troubleshooting steps. It's essential to ensure you're interpreting the error code correctly, as F8 is more commonly associated with ASKO dishwashers. If the problem persists, consider professional diagnosis.
Common Symptoms:
- Display shows "F8" (reported by user)
- Unable to confirm consistent washer symptom patterns tied to F8 in available public sources
Possible Causes
- Clogged drain filter
- Faulty drain pump
- Blocked drain hose
How to Fix Error F8
DIY Fix Verify the exact model and confirm the code format (E-code vs F-code) using the correct manual
- Locate the washer model number/product code on the rating plate (commonly inside the door opening or on the rear panel).
- Search the official ASKO manual database for your exact model and download the user manual.
- Check the manual's troubleshooting/error section to confirm whether the washer uses E-codes or any F-codes.
- Re-check the display carefully: confirm if it could be E8, F0/F8, or another similar-looking code depending on segment display.
Technician Only Model-specific diagnostic using service documentation and error history (required because F8 is not reliably mapped to ASKO washers in public sources)
- Confirm the exact model/series and region variant (consumer vs professional).
- Access the appropriate ASKO service manual for the specific model/series and read the fault code mapping used by that control/display.
- Enter service/diagnostic mode per the service manual instructions (model-specific) and retrieve stored fault history.
- Diagnose according to the documented fault definition for the unit (do not assume dishwasher fault meanings apply to washers).
Parts needed: Model-specific control/display module (for code mapping), Model-specific sensors/valves/pumps as indicated by service manual after fault definition is confirmed
- If the code returns immediately after restarting and the washer will not run a cycle.
- If there is water leaking, burning smell, repeated tripping of breakers, or the drum is not turning (stop use immediately).
- If you cannot find any reference to F8 in the manual for your exact model.
Next step
Choose the next step for F8
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | ASKO 8059401 |
| voltage_rating | 120V AC |
Common Questions
What does F8 error mean on asko washing machine?
F8 typically indicates a drainage issue, causing the washer not to complete cycles.
Can I fix asko washing machine F8 error myself?
Yes, verify your model and check the user manual for troubleshooting steps.
How much does it cost to fix F8 error?
Repair costs vary widely; diagnostic/service calls typically range from $100 to $300, plus parts.
When should I call a technician for F8?
Call if the error returns after restarting, if leaks or burning smells occur, or if you can't find F8 in your manual.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!