Asko Washing Machine Error F3
⚡ Quick Answer: The Asko washing machine error F3 indicates a drainage or pump fault, preventing the washer from properly draining water. This often results in the wa... ✅ DIY Fixable
What Does Error F3 Mean?
The Asko washing machine error F3 indicates a drainage or pump fault, preventing the washer from properly draining water. This often results in the washer stopping mid-cycle, water remaining in the drum, and unusual pump noises. Common causes include a clogged drain pump filter or hose, or a faulty drain pump. Addressing this issue promptly is essential to avoid further complications.
Common Symptoms:
- Washer stops mid‑cycle instead of completing
- Water remains in drum instead of draining
- Error F3 displayed on control panel
- Pump noises inconsistent or muted
Possible Causes
- Clogged drain pump filter or drain hose (medium)
- Faulty or failing drain pump (medium)
How to Fix Error F3
DIY Fix Clean Drain Filter and Hose
- Turn off and unplug the washer.
- Locate the drain pump filter door (often bottom front).
- Open and remove filter; clear debris and rinse clean.
- Inspect the drain hose for kinks or blockages; straighten and clear if needed.
- Reconnect everything and run a short rinse cycle to test.
Technician Only Inspect and Replace Drain Pump
- Disconnect power and water supply.
- Access the drain pump by removing the front bottom panel.
- Test the pump for proper operation and check impeller movement.
- Replace the pump if it is not functioning or is intermittently failing.
- Reassemble and test the washer through a full cycle.
Parts needed: Drain pump assembly
- If cleaning filters/hoses does not clear the error
- If the drain pump assembly fails testing
- If water leaks or electrical issues occur during troubleshooting
Next step
Choose the next step for F3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | ASKO 502123 |
| voltage_rating | 120V AC |
Common Questions
What does F3 error mean on asko washing machine?
F3 error indicates a drainage or pump fault where the washer cannot drain water properly.
Can I fix asko washing machine F3 error myself?
Yes, you can clean the drain filter and hose to resolve the F3 error.
How much does it cost to fix F3 error?
The estimated cost to fix the F3 error ranges from ¥8,000 to ¥25,000, depending on parts and labor.
When should I call a technician for F3?
Call a technician if cleaning the filters doesn't resolve the error or if the drain pump assembly fails testing.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!