Asko Washing Machine Error F6
⚡ Quick Answer: The F6 error code on your Asko washing machine indicates a malfunction in the motor control or speed regulation system. This often results in the wash... ✅ DIY Fixable
What Does Error F6 Mean?
The F6 error code on your Asko washing machine indicates a malfunction in the motor control or speed regulation system. This often results in the washer stopping mid-cycle, the drum failing to spin, or hesitating during operation. If the error appears when trying to start or change drum speed, it may be due to issues with the motor itself or its associated parts.
Common Symptoms:
- Washer stops mid‑cycle
- Drum fails to spin or hesitates
- Error appears when washer tries to start or change drum speed
Possible Causes
- Motor control/motor malfunction (medium)
How to Fix Error F6
DIY Fix Basic user checks before calling service
- Turn off and unplug the washer for 5–10 minutes to reset control electronics
- Make sure the load size is not excessive and redistribute laundry evenly
- Check that drum can be spun freely by hand when the machine is off (no unusual resistance)
- Ensure washer is on a stable, level surface
Technician Only Technician diagnostics and repair
- Inspect motor and motor control board for faults
- Check motor brushes and replace if worn
- Test motor speed control circuit and related wiring harnesses
- Verify that control board outputs correct drive signals to motor
- Replace defective motor control board or motor assembly as needed
Parts needed: motor, motor brushes, motor control board, wiring harnesses
- If basic user resets and load adjustments do not clear the error
- If the drum will not turn freely by hand
- If error returns immediately after power cycling
Next step
Choose the next step for F6
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Mechanism |
| resistance | 1-5 ohms |
| part_number | ASKO 800005 |
| voltage_rating | 120V AC |
Common Questions
What does F6 error mean on asko washing machine?
F6 indicates a motor control issue that stops the washer mid-cycle and affects drum spinning.
Can I fix asko washing machine F6 error myself?
Yes, you can try resetting the machine and checking the load size and drum movement.
How much does it cost to fix F6 error?
Repair costs for the F6 error range from $150 to $500+, depending on parts and labor.
When should I call a technician for F6?
Call a technician if basic resets do not work, the drum won't turn, or if the error returns immediately after a power cycle.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!