Asko Washing Machine Error F19
⚡ Quick Answer: The Asko washing machine error F19 indicates a potential malfunction in the drain pump. This issue may be accompanied by unusual noises during the spi... ✅ DIY Fixable
What Does Error F19 Mean?
The Asko washing machine error F19 indicates a potential malfunction in the drain pump. This issue may be accompanied by unusual noises during the spin cycle and can prevent water from draining properly. If your machine stops and displays the F19 error code, it signifies that the wash cycle cannot proceed. Attempt basic troubleshooting steps, such as power cycling the machine and checking the load balance, before seeking professional assistance.
Common Symptoms:
- Machine stops and displays F19
- Wash cycle does not proceed
Possible Causes
- Clogged drain pump
- Faulty drain pump motor
- Wiring issues
How to Fix Error F19
DIY Fix Check basic machine operation
- Power off the machine and unplug it for 1–2 minutes then plug back in and retry.
- Check if any buttons need resetting or if load is balanced.
Technician Only Professional diagnostics for F19
- Technician should connect to Asko service resources to obtain official error definition and diagnostic steps.
- Inspect control board communication and related wiring for faults.
Parts needed: Control board / wiring harness (if indicated), Error-specific sensors or modules
- When F19 persists after power cycling and basic checks.
- If machine does not start any cycle.
Next step
Choose the next step for F19
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | ASKO 8052180 |
| voltage_rating | 240V AC |
Common Questions
What does F19 error mean on asko washing machine?
F19 indicates a possible malfunction in the drain pump, causing the machine to stop and not drain water.
Can I fix asko washing machine F19 error myself?
Yes, you can try power cycling the machine and ensuring the load is balanced.
How much does it cost to fix F19 error?
Repair costs vary based on diagnosis and parts needed.
When should I call a technician for F19?
Call a technician if F19 persists after basic troubleshooting or if the machine does not start any cycle.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!