Asko Washing Machine Error F14
⚡ Quick Answer: The ASKO washing machine error code F14 indicates a possible issue with the door lock mechanism. This can prevent the machine from starting or the doo... ✅ DIY Fixable
What Does Error F14 Mean?
The ASKO washing machine error code F14 indicates a possible issue with the door lock mechanism. This can prevent the machine from starting or the door from unlocking. It's important to ensure the door is fully closed and latched. If the error persists, try resetting the machine by unplugging it for a few minutes. If the problem continues after these checks, further inspection may be needed.
Possible Causes
- Door Lock Assembly
- Wiring Issues
- Control Board Malfunction
How to Fix Error F14
DIY Fix Check basics when an unknown code appears
- Turn the washer off and unplug it for a few minutes, then plug it back in and restart a cycle to see if the code clears.
- Ensure the door is properly closed and latched.
- Check for any obvious issues such as water supply interruption, drainage blockage, or unbalanced laundry.
Technician Only Refer to official model‑specific documentation and diagnostic tools
- Consult the official Asko service manual for the specific model to check for any F‑series codes not published online.
- Use diagnostic mode or service software where available to read detailed error registers.
- Visually inspect control boards and wiring harnesses for damage or loose connections.
- If the washer repeatedly displays F14 and normal basic checks (power reset, door closure, supply/drainage) do not resolve it.
- If water leakage, unusual noises, or inability to start cycles accompanies the code.
Next step
Choose the next step for F14
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
- Typical part-only price
- $30 - $75
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 10-20 ohms |
| part_number | ASKO 8055004 |
| voltage_rating | 240V AC |
Common Questions
What does F14 error mean on ASKO washing machine?
F14 error typically indicates a malfunction in the door lock mechanism, preventing the washer from starting.
Can I fix ASKO washing machine F14 error myself?
Yes, check if the door is securely closed and try resetting the machine by unplugging it for a few minutes.
How much does it cost to fix F14 error?
Repair costs for F14 error can vary based on the model and region, so it’s best to consult with a technician.
When should I call a technician for F14?
Call a technician if the F14 error persists after basic checks and resets, or if you notice water leakage or unusual noises.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!