Asko Washing Machine Error F13

⚡ Quick Answer: The F13 error code on ASKO washing machines may indicate a miscommunication or misread related to the water level sensor, resulting in issues with wat... ⚠️ Difficulty Varies

What Does Error F13 Mean?

The F13 error code on ASKO washing machines may indicate a miscommunication or misread related to the water level sensor, resulting in issues with water filling or erratic water levels. Since this code is not standard for ASKO washers, confirm the exact model and code displayed. Check for E-codes that may resemble F13, as these could provide accurate diagnostic information for your specific model.

Common Symptoms:

  • Display shows "F13" (reported by user) but code is not found in common ASKO washer error-code lists
  • Possible mismatch between appliance type/model and the referenced error code

Possible Causes

  • Water Level Sensor

How to Fix Error F13

DIY Fix Confirm the exact model and the exact code being shown (avoid misread/incorrect code)

  1. Locate the model number/PNC on the rating plate (commonly inside the door area or rear panel) and write it down exactly.
  2. Re-check the display: some ASKO washers show E-codes (e.g., E13) that can be mistaken for F13 depending on font/segments.
  3. If the washer has indicator lights instead of a full display, consult the model-specific manual for the correct interpretation of the light pattern.
  4. Use ASKO’s official manual search by model/product code to obtain the correct user manual for your exact washer.

Technician Only Use model-specific ASKO service documentation to map the displayed code/message to the correct fault

  1. Verify whether the appliance is truly an ASKO washing machine (not a washer-dryer from a different OEM) and confirm the exact model identifier.
  2. Retrieve the correct ASKO service documentation for the model and confirm whether the platform uses E## codes, message-based errors, or light codes.
  3. If the customer insists it is F13, validate whether the display is actually showing E13 or another E-code; proceed with the service-manual diagnostic tree for that confirmed code.

Parts needed: Varies by confirmed code (model-specific), User interface/display module (only if the code is clearly erroneous due to display segmentation)

🛑 When to Call a Pro:
  • If the washer is leaking water, overfilling, or you cannot stop water flow (turn off the tap and call service).
  • If the washer repeatedly stops mid-cycle and the code persists after verifying the exact model/code from the manual.
  • If electrical symptoms occur (burning smell, smoke, tripping breaker/RCD).
  • If the display characters appear corrupted or inconsistent (possible UI/control issue).

Technical Specifications

wattage N/A
component Water Level Sensor
resistance 1-5 ohms
part_number ASKO 8050460
voltage_rating 120V AC

Common Questions

What does F13 error mean on asko washing machine?

F13 may indicate a water level sensor issue, but confirm the exact model and code.

Can I fix asko washing machine F13 error myself?

Yes, check the model number, verify the displayed code, and consult the user manual for guidance.

How much does it cost to fix F13 error?

Repair costs are unknown until the correct model-specific fault code is confirmed.

When should I call a technician for F13?

Contact a technician if the washer leaks, overfills, displays corrupted characters, or if electrical issues arise.

Sources & References

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!