Asko Washing Machine Error F10

⚡ Quick Answer: The Asko washing machine error F10 indicates a drainage failure, where the machine detects that water isn’t being removed properly. This often resul... ✅ DIY Fixable

What Does Error F10 Mean?

The Asko washing machine error F10 indicates a drainage failure, where the machine detects that water isn’t being removed properly. This often results in the machine appearing to overfill or stop mid-cycle, accompanied by unusual sounds during the spin or drain stages. Addressing this issue typically involves checking for a clogged drain hose or a faulty drain pump.

Common Symptoms:

  • Water not draining at end of cycle
  • Machine appears to overfill or stops mid‑cycle
  • Error F10 displayed shortly after water intake or during spin/drain stages

Possible Causes

  • Clogged or obstructed drain hose (medium)
  • Faulty or blocked drain pump (medium)

How to Fix Error F10

DIY Fix Check and clear drain hose

  1. Turn off and unplug the washing machine.
  2. Locate the drain hose behind the washer.
  3. Inspect for kinks or sharp bends and straighten them.
  4. Detach the hose and flush with water to remove blockages.
  5. Reconnect securely and test a drain cycle.

DIY Fix Clean drain pump filter

  1. Turn off the machine and unplug it from the power outlet.
  2. Open the access panel at the bottom front of the washer.
  3. Place a shallow tray or towel to catch residual water.
  4. Unscrew and remove the pump filter, clean debris, and reinstall.
  5. Run a short rinse/drain cycle to verify the issue is cleared.

Technician Only Test and replace drain pump if necessary

  1. Disconnect the washer from power and water connections.
  2. Access the drain pump assembly according to ASKO service manual.
  3. Test the pump motor and impeller for proper operation with appropriate tools.
  4. Replace the pump if electrical or mechanical failure is confirmed.
  5. Reassemble and test the washer thoroughly.

Parts needed: drain pump assembly, pump seal/gasket if applicable

🛑 When to Call a Pro:
  • If draining issues persist after clearing hose and filter
  • If draining pump tests show no operation or abnormal noise
  • If water leaks are present or error recurs immediately

Technical Specifications

wattage 100W
component Drain Pump
resistance 20-30 ohms
part_number ASKO 502205
voltage_rating 240V AC

Common Questions

What does F10 error mean on asko washing machine?

The F10 error indicates a drainage failure, where water isn't being removed properly, potentially causing overfill and unusual sounds.

Can I fix asko washing machine F10 error myself?

Yes, you can check and clear the drain hose or clean the drain pump filter to resolve the F10 error.

How much does it cost to fix F10 error?

Repair costs for the F10 error range from ¥10,000 to ¥30,000, depending on parts and labor.

When should I call a technician for F10?

Call a technician if the issue persists after DIY actions or if tests show the drain pump is faulty.

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!