Arcelik Dishwasher Error E01

⚡ Quick Answer: The arcelik dishwasher E01 error indicates a water inlet or drainage issue, preventing the appliance from filling with the required water. This can re... ✅ DIY Fixable

What Does Error E01 Mean?

The arcelik dishwasher E01 error indicates a water inlet or drainage issue, preventing the appliance from filling with the required water. This can result in the dishwasher cycle starting and then quickly stopping, with no or very low water detected inside. Common causes include a closed water supply tap, low water pressure, a clogged or kinked inlet hose, or a faulty water inlet valve.

Common Symptoms:

  • Dishwasher cycle starts then quickly stops and displays E01 code
  • Dishwasher fails to fill with water
  • No or very low water detected inside dishwasher at start

Possible Causes

  • Water supply not reaching dishwasher (e.g., closed tap or low pressure) (medium)
  • Clogged or kinked water inlet hose / filter (medium)
  • Faulty water inlet valve (medium)
  • Water level sensor / flow meter fault (low)

How to Fix Error E01

DIY Fix Basic water supply checks

  1. Ensure the water supply tap supplying the dishwasher is fully open.
  2. Check that the home’s water pressure is adequate (run another faucet to confirm).
  3. Inspect the water inlet hose for kinks, bends, or obvious blockages.

DIY Fix Clean inlet filter and hose

  1. Turn off water and power to the dishwasher.
  2. Disconnect the water inlet hose at the back of the dishwasher.
  3. Check and clean the filter screen on the hose and at the dishwasher’s inlet.
  4. Reconnect securely and restore water and power.

Technician Only Inspect/replace water inlet valve

  1. Disconnect power and water supply to dishwasher.
  2. Remove access panel and locate the water inlet valve.
  3. Test valve operation with multimeter and replace if faulty.
  4. Reassemble and test dishwasher water fill.

Parts needed: water inlet valve, multimeter for testing

🛑 When to Call a Pro:
  • If after basic checks and inlet cleaning the E01 persists.
  • If you find tinges of leaking, control board issues, or unusual electrical behavior.

Next step

Choose the next step for E01

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Water Inlet Valve

Controls the flow of hot and cold water into the appliance.

Typical part-only price
$25 - $60
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E01 error mean on arcelik dishwasher?

E01 means a water inlet issue, causing the dishwasher to stop cycling due to insufficient water.

Can I fix arcelik dishwasher E01 error myself?

Yes, check the water supply, inspect the inlet hose, and clean the filter.

How much does it cost to fix E01 error?

Repair costs range from $30 to $120, depending on parts and labor.

When should I call a technician for E01?

Call if the error persists after checks or if you notice leaks or electrical issues.

Sources & References

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!