Arcelik Dishwasher Error E07

⚡ Quick Answer: The Arcelik dishwasher E07 error code indicates a malfunction with the turbidity or sump level sensor, causing the dishwasher to stop mid-cycle. Users... ✅ DIY Fixable

What Does Error E07 Mean?

The Arcelik dishwasher E07 error code indicates a malfunction with the turbidity or sump level sensor, causing the dishwasher to stop mid-cycle. Users may hear unusual noises from the sump area and the cycle will not complete until the issue is resolved. This error typically arises from a dirty sensor or sump area, a fault in the sensor itself, or loose wiring connections.

Common Symptoms:

  • Dishwasher stops mid‑cycle when E07 is displayed on the control panel
  • Unusual noises from the sump area around the base of the dishwasher
  • Cycle does not complete until fault is resolved

Possible Causes

  • Turbidity or sump level sensor fault (medium)
  • Dirty sensor or sump area preventing proper sensing (medium)
  • Loose sensor connection or wiring fault between sensor and control board (medium)

How to Fix Error E07

DIY Fix Clean sump and turbidity sensor area

  1. Turn off and unplug the dishwasher from power.
  2. Remove the lower dish rack and filters.
  3. Clean the sump area thoroughly, paying attention to clear plastic windows or sensor housings.
  4. If the turbidity/optical sensor is accessible from the outside, clean the lens with a soft cloth.
  5. Reassemble and test by running a short cycle.

Technician Only Inspect and replace turbidity/sump sensor or repair wiring

  1. Disconnect power and remove lower panels to access the turbidity/sump level sensor.
  2. Inspect sensor connections and wiring harness for corrosion or damage.
  3. Test sensor with a multimeter or diagnostic tool per service manual guidance.
  4. Replace faulty sensor or repair wiring as indicated by diagnostics.
  5. Verify correct operation with test cycle.

Parts needed: Turbidity/optical sensor, Wiring harness/connector

🛑 When to Call a Pro:
  • If cleaning and basic connection checks do not resolve the fault
  • If sensor replacement or electrical diagnostics are required
  • If you are not comfortable working inside the dishwasher due to electrical/water risk

Next step

Choose the next step for E07

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

Typical part-only price
$20 - $120
DIY difficulty
Medium
Estimated time
30-90 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E07 error mean on arcelik dishwasher?

E07 indicates a turbidity or sump level sensor malfunction, causing the dishwasher to stop mid-cycle.

Can I fix arcelik dishwasher E07 error myself?

Yes, you can clean the sump and turbidity sensor area to potentially resolve the issue.

How much does it cost to fix E07 error?

Repair costs for the E07 error range from $50 to $200, depending on parts and labor.

When should I call a technician for E07?

Call a technician if cleaning doesn't help, or if you need sensor replacement or electrical diagnostics.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!