Arcelik Dishwasher Error E06
⚡ Quick Answer: The arcelik dishwasher E06 error indicates a malfunction related to the NTC temperature sensor, impacting the dishwasher's ability to heat water durin... ✅ DIY Fixable
What Does Error E06 Mean?
The arcelik dishwasher E06 error indicates a malfunction related to the NTC temperature sensor, impacting the dishwasher's ability to heat water during cycles. As a result, you may experience inadequate cleaning performance, as the water temperature may not reach the required levels. This error could also lead to cycle interruptions or pauses if the temperature control fails.
Common Symptoms:
- Dishwasher displays E06 and may stop heating water properly
- Wash performance may decrease due to incorrect water temperature
- Cycle may pause or not complete if temperature control fails
Possible Causes
- NTC temperature sensor failure (medium)
How to Fix Error E06
DIY Fix Initial checks and cycle restart
- Turn off the dishwasher and disconnect it from power.
- Wait 5–10 minutes, then restore power and restart the cycle to see if the error clears.
- Ensure that electrical connections to the dishwasher are secure at the outlet or breaker.
Technician Only Diagnose and replace NTC temperature sensor
- Disconnect power and water supply to the dishwasher.
- Access the internal control and heating assembly to locate the NTC temperature sensor.
- Test the resistance of the NTC sensor with a multimeter to verify it is out of spec.
- Replace the NTC temperature sensor if faulty and reassemble.
- Run a test cycle to confirm resolution.
Parts needed: NTC temperature sensor, Multimeter (diagnostics)
- If the error persists after resetting power and simple checks
- If there is evidence of wiring damage, burnt components, or incorrect sensor readings
- If you are not comfortable performing internal diagnostics safely
Next step
Choose the next step for E06
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E06 error mean on arcelik dishwasher?
E06 indicates a malfunction with the NTC temperature sensor, affecting water heating and wash performance.
Can I fix arcelik dishwasher E06 error myself?
Yes, you can try resetting the dishwasher and checking connections before seeking professional help.
How much does it cost to fix E06 error?
Repair costs typically range from $50 to $150, depending on parts and labor.
When should I call a technician for E06?
Call a technician if the error persists after resetting, or if you notice wiring damage or burnt components.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!