Arcelik Dishwasher Error E09

⚡ Quick Answer: The arcelik dishwasher E09 error indicates a drying system malfunction, typically resulting in dishes that are wet or cold at the end of the cycle. Th... ✅ DIY Fixable

What Does Error E09 Mean?

The arcelik dishwasher E09 error indicates a drying system malfunction, typically resulting in dishes that are wet or cold at the end of the cycle. This error may be linked to a failed drying heater, a defective turbo-drying fan motor, or issues with the NTC sensor in the drying duct. Users may also notice unusual noises during operation, and the interior of the dishwasher remains cool during the drying phase.

Common Symptoms:

  • Dishwasher completes wash but fails to dry dishes
  • Display shows E09 at end of cycle
  • Interior remains cool or not sufficiently warm during drying

Possible Causes

  • Drying heater failure (medium)
  • Defective fan motor in turbo-drying system (medium)
  • Failed NTC sensor in drying duct (medium)
  • Control board drying relay fault (medium)

How to Fix Error E09

DIY Fix Basic checks and power reset

  1. Turn off and unplug the dishwasher from the wall outlet.
  2. Wait 5–10 minutes to allow internal capacitors to discharge.
  3. Reconnect power and run a short rinse cycle to see if E09 reappears.

Technician Only Inspect and test drying/heating components

  1. Disconnect dishwasher from power and access the drying system/heater assembly.
  2. Visually inspect and manually spin the drying fan for obstruction or damage.
  3. Use a multimeter to measure resistance of the drying heater and NTC sensor; compare to specification.
  4. Check wiring, connectors, and the drying relay on the control board for continuity and damage.
  5. Replace failed components and test the machine.

Parts needed: Drying heater, Turbo-drying fan motor, NTC drying duct temperature sensor, Control board/drying relay

🛑 When to Call a Pro:
  • If the error persists after power reset and basic user-level checks
  • If you are not experienced with high-voltage appliance repair
  • If multimeter diagnostics are inconclusive or point to control board failure

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number Arcelik 123456789
voltage_rating 230V AC

Common Questions

What does E09 error mean on arcelik dishwasher?

E09 indicates a malfunction in the drying system, causing dishes to remain wet or cold.

Can I fix arcelik dishwasher E09 error myself?

Yes, you can perform basic checks and a power reset to see if the error resolves.

How much does it cost to fix E09 error?

Repair costs range from ¥8,000 to ¥30,000+, depending on parts and labor.

When should I call a technician for E09?

Call a technician if the error persists after a reset or if you lack experience with appliance repairs.

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!