White Westinghouse Washing Machine Error EH2

⚡ Quick Answer: The White Westinghouse Washing Machine EH2 error indicates a malfunction in the door lock mechanism, preventing the machine from starting or completin... ✅ DIY Fixable

What Does Error EH2 Mean?

The White Westinghouse Washing Machine EH2 error indicates a malfunction in the door lock mechanism, preventing the machine from starting or completing cycles. This error can stem from issues with the electrical supply or faulty wiring, leading to the control panel displaying EH2, unexpected stops, or blinking lights.

Common Symptoms:

  • Control panel displays EH2 and cycle does not complete
  • Machine may not start or stops unexpectedly
  • Display lights may blink or go off and unusual noises at start

Possible Causes

  • Inadequate or fluctuating mains electrical supply (low)
  • Faulty wiring or power connection (low)

How to Fix Error EH2

DIY Fix Check power supply and connections

  1. Ensure the washer is plugged into a properly functioning outlet.
  2. Check that the power cord and plug are not damaged.
  3. Try plugging the machine into another known‑good outlet.

Technician Only Measure and verify electrical input and internal wiring

  1. Use a multimeter to measure voltage at the outlet and the machine’s input terminals.
  2. Inspect internal wiring harnesses for damage or loose connections.
  3. Verify that any supply voltage sensors are operating correctly.

Parts needed: Multimeter (for diagnosis), Power cord, Internal wiring harness

🛑 When to Call a Pro:
  • If power measurements are outside safe ranges after user checks
  • If any internal wiring damage or questionable components are found
  • If the washer continues to show EH2 despite basic troubleshooting

Next step

Choose the next step for EH2

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Door Lock Assembly

Secures the door shut during operation for safety and signals the control board to run.

Typical part-only price
$30 - $75
DIY difficulty
Easy
Estimated time
10-20 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 10W
component Door Lock Assembly
resistance 20-30 ohms
part_number WH12X10529
voltage_rating 120V AC

Common Questions

What does EH2 error mean on White Westinghouse Washing Machine?

EH2 indicates a door lock mechanism failure, preventing the washer from starting or completing cycles.

Can I fix White Westinghouse Washing Machine EH2 error myself?

Yes, check the power supply, connections, and ensure the washer is plugged into a working outlet.

How much does it cost to fix EH2 error?

Repair costs range from ₹1000 to ₹5000, depending on diagnostic and minor repairs.

When should I call a technician for EH2?

Call a technician if power measurements are unsafe or if the error persists after basic troubleshooting.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!