White-Westinghouse Washing Machine: not draining
What is this symptom?
If your White Westinghouse washing machine is not draining, you may find water remains in the tub after washing. This common issue can stem from a clogged drain pump filter, a blocked drain hose, or even a faulty drain pump. Understanding the reasons for this malfunction can help you resolve it efficiently.
Important Tips for White-Westinghouse Models
- Common guidance for White-Westinghouse models suggests checking filter blockages, drain hose clogs and testing pump for malfunction as specific troubleshooting steps.
Possible Causes
Clogged drain pump filter or internal debris blocking drainage path
How to Identify: Slow or no water exiting when draining; visible lint/debris in accessible filter; machine may struggle to drain repeatedly.
Part: Drain pump filter / internal drain pathway
Blocked or kinked drain hose
How to Identify: Water remains after cycle and hose shows kinks, bends, or visible debris; disconnecting hose shows obstruction.
Part: Drain hose
Faulty drain pump (mechanical/pump motor failure)
How to Identify: No sound from pump during drain cycle; humming noise without water movement; repeated failed drain attempts after clearing debris.
Part: Drain pump assembly
Incorrect drain hose installation height or positioning
How to Identify: Hose inserted too far into standpipe or positioned below recommended height causing siphoning issues.
Part: Drain hose setup
Home drain plumbing blockage
How to Identify: Water backs up into machine or other fixtures; other drains in home are slow or blocked.
Part: Household drain line
DIY Solutions
Clean Accessible Drain Pump Filter
- Unplug machine and locate drain pump filter access panel at lower front.
- Place towel/bin, open access panel, then slowly unscrew filter cap to drain residual water.
- Remove debris from filter, rinse under water, reinsert and tighten filter cap.
- Run a drain/spin cycle to test drainage.
Inspect and Straighten/Unclog Drain Hose
- Unplug machine and detach drain hose from back of washer and standpipe/drain.
- Inspect hose for kinks, bends or visible obstructions.
- Use brush or water flush to clear any blockages, ensure hose is straight and reattach.
- Secure hose at proper height to avoid siphoning issues and test drain cycle.
Next step
Choose the next step for not draining
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Drain Pump Replacement
Internal Drain Line Clearing or Machine Disassembly
When to Call a Professional
Preventive Maintenance
-
Clean drain pump filter: Blockage-related drainage issues
Frequency: monthly -
Inspect drain hose positioning and kinks: Hose-related drain problems
Frequency: every 3 months
Frequently Asked Questions
Why is my White Westinghouse Washing Machine not draining?
How do I fix White Westinghouse Washing Machine not draining myself?
How much does it cost to fix not draining?
When should I call a technician for not draining?
References & Sources
- Westinghouse Washing Machine Malfunctions Repair-Blog
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Clogged drain pump (2 mentions)
User Suggested Solutions
-
Disassemble and clean the drain pump
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
The machine isn't draining and is making a humming noise.
The drain pump may be clogged and can be disassembled by prying it off the motor shaft.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!