White-Westinghouse Washing Machine Error E33
⚡ Quick Answer: The White Westinghouse Washing Machine E33 error indicates a malfunction in the pressure system, often related to the pressure sensor (presostato). Th... ✅ DIY Fixable
What Does Error E33 Mean?
The White Westinghouse Washing Machine E33 error indicates a malfunction in the pressure system, often related to the pressure sensor (presostato). This results in issues such as the cycle stopping, excessive foam in the drum, and potential drainage problems. The door may also fail to open or close properly. Addressing the pressure sensor and ensuring correct detergent usage can help resolve this issue.
Common Symptoms:
- Cycle stops and does not advance
- Excess foam observed in drum
- Error displayed on control panel
- Water not draining properly (possible)
- Unusual noise during operation
Possible Causes
- Pressure sensor (presostato) detects abnormal pressure leading to overfill or foam detection (medium)
How to Fix Error E33
DIY Fix Check for Excess Foam & Detergent Issues
- Stop the machine and open the door if safe to do so
- Reduce the amount of detergent used for the next cycle according to manufacturer’s recommendations
- Avoid using non‑HE detergent if applicable
DIY Fix Basic Pressure & Hose Inspection
- Ensure the water supply tap is fully open
- Check that the drain hose is not kinked or obstructed
- Clean any visible inlet filters
Technician Only Inspect/Replace Pressure Sensor (Presostato) and Related Components
- Disconnect power and access the internal pressure sensor and hoses
- Test pressure sensor with appropriate diagnostics (multimeter, etc.)
- Check for leaks or blockages in pressure tubes
- Replace the pressure sensor if faulty
Parts needed: Pressure sensor (presostato), Pressure hose
- If there are signs of electrical failure (smoke, burning smell)
- If water leaks are present while the E33 persists
- If basic checks and detergent adjustment do not clear the error
Next step
Choose the next step for E33
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
- Typical part-only price
- $30 - $75
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E33 error mean on White Westinghouse Washing Machine?
The E33 error indicates a pressure sensor malfunction, causing cycle interruptions and excessive foam.
Can I fix White Westinghouse Washing Machine E33 error myself?
Yes, check for excess foam, reduce detergent usage, and inspect hoses for kinks or clogs.
How much does it cost to fix E33 error?
Repair costs for the E33 error range from $50 to $150 for parts and labor, depending on location.
When should I call a technician for E33?
Call a technician if you notice electrical issues, persistent water leaks, or if DIY fixes don't resolve the error.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!